Dec 27th, 2011, 17:44
|
#92
|
Member
注册日期: Sep 2011
帖子: 77
积分:3
精华:1
|
hack 1470
1. 把 SD card 装上 magellan 1470. Power On.
2. 屏幕会显示 please wait while miopocket installs... blah, blah...
3. 不要管TA。不要乱动,等到看到有1排 icon 了(MioMap, iGO, MP Settings, etc...).
4. 按iGO 滴 icon,TA 会要你指igo 滴application path。娃就指到 \igo8\MobileNavigator.exe.
5. 你会看到iGO 在 initialize language, poi, mainscreen...
6. 然后你就会看到 Navigation Menu... 上有4颗 button: Find, Route, Manage, Settings.
6. 这时候娃滴机子还木连上 GPS。click on Settings button, 就会看到6颗 button: Map Screen, Sound, Route Planning, Regional, Navigation, Warnings. 屏幕下面有1 向右滴箭头,说明还有别滴 settings. Click on 向右滴箭头。
7. 屏幕上又有6颗button: GPS, TMC, Menu, Device, Track Logs, About.
8. Click on GPS button, 娃滴屏幕说:
GPS Settings
GPS receiver is not connected.
GPS Enabled - checkbox checked.
Port - 2.
Baud Rate - 4800.
屏幕右下角 Autodetect 素 disabled.
uncheck GPS enbabled. 屏幕右下角 Autodetect 会被 enabled。 click on Autodect,娃滴1470 就自动找到 port - 7 boud rate - 57600了。
然后check [GPS Enabled] checkbox. ----- 网上许多童鞋在自己设定 port 和 boud rate in sys.txt。娃又木知,跟着瞎起哄。结果浪费了娃1 小时。igo8.3.5.193799 完全不要这么麻烦。TA 能autodetect 这些东东都 save 到了 \igo8\save\system.ini 里啦。
voila - Magellan 1470 with Miopocket 4.0 r68 + iGO8.3.5 + iGO North America Map.
此帖于 Dec 27th, 2011 18:21 被 41217086 编辑。
|
|
|
|