温故而知新:没锅的日子真难受，有无卫视烧友，交流一下(2) - 第10页

wayaya · Nov 12th, 2005, 03:32

为什么一运行wall.exe就出错:"could not acquire I/O"? 我用的是XP, administrator account, 在control panel 中LPT1口显示工作正常，另外我已把打印机卸载了.

FireROR · Nov 12th, 2005, 07:01

引用:

作者: wayaya

为什么一运行wall.exe就出错:"could not acquire I/O"? 我用的是XP, administrator account, 在control panel 中LPT1口显示工作正常，另外我已把打印机卸载了.

wall.exe上点右键,兼容性选98/me.然后再运行就好了

LivingInMississauga · Nov 12th, 2005, 08:08

引用:

作者: da-ming

是multistar MS100的机子. 另外连接机子和电脑的连接线是什么规格的? 谢过

你的BIN的文件需要自己找。

连线是RS232 9PIN Female-Female Series连线。
你买不到的话可以自己焊一根。
2-2
3-3
5-5

注意，有些买的线是
2-3
3-2
5-5
不能用。

2， 3 用于通讯，5是地线。

wayaya · Nov 12th, 2005, 11:00

引用:

作者: FireROR

wall.exe上点右键,兼容性选98/me.然后再运行就好了

请问您有没有jkeys.def for flash 39vf800a, bluewhale 帖过一个，但好像打不开。谢谢

FireROR · Nov 12th, 2005, 12:52

引用:

作者: wayaya

请问您有没有jkeys.def for flash 39vf800a, bluewhale 帖过一个，但好像打不开。谢谢

俺不知道你用啥机器.应该和机器有关系吧?你post型号上来.我帮你找找

wayaya · Nov 12th, 2005, 14:29

引用:

作者: FireROR

俺不知道你用啥机器.应该和机器有关系吧?你post型号上来.我帮你找找

when start jkeys, it can detect the processor STI5518MVB-X and device ID, but give me the error message "error reading from IRD(DCU Peek)".

I can only find flash type 39VF800a in the IRD model STARSAT. If I try to save mem, there will be a message of "error reading from memory". so i think maybe the flash is not correctly defined in the jkeys.def.

I may need to find another .bin file because the one I have right now is for flash 29lv160

fleuve · Nov 12th, 2005, 20:28

着急啊: 拿位大侠帮个忙!

锅和LNB是BELL的82 的,现在想看119
今天买来了PANSAT2700,下载了Ch Editor187 (Pansat 2700A),GTRom Loader v3[1].35 [pansat2700A],Pansat 2700A_050826_104_api(N),
老大们,接下来怎么办啊?

FireROR · Nov 12th, 2005, 20:54

引用:

作者: wayaya

when start jkeys, it can detect the processor STI5518MVB-X and device ID, but give me the error message "error reading from IRD(DCU Peek)".

I can only find flash type 39VF800a in the IRD model STARSAT. If I try to save mem, there will be a message of "error reading from memory". so i think maybe the flash is not correctly defined in the jkeys.def.

I may need to find another .bin file because the one I have right now is for flash 29lv160

no, baz your jtag cable is too long. fix it to 6' and you can get it work.

FireROR · Nov 12th, 2005, 20:59

引用:

作者: FireROR

http://www.fire.5gigs.com/cooltec_new.zip

cooltec的最新bin,适合新老版本

Cooltec老版的,请不要用这个BIN.会kill的,新版本似乎没有问题.

green_frog · Nov 12th, 2005, 21:31

New to the FTA. Trying to update the bin but I think pushed the button too early. Now my receiver is stuck on boot and my computer can't communicate with the receiver. Any help is appriciated. Thanks.

My reveiver is digiwave 7000.

wayaya · Nov 12th, 2005, 22:34

引用:

作者: FireROR

no, baz your jtag cable is too long. fix it to 6' and you can get it work.

does it make so much difference?

by the way, i google this error and find someone says it can be solved by grounding pad 1 (of flash?), do you think i should try it? thanks

vvc · Nov 12th, 2005, 23:19

引用:

作者: HHH

请确认是不是这个：
首先下载最新升级软件（2005年10月30日）

新软件的菜单是竖着排列的。

按“MENU” 进入菜单，向下进入“USER INSTALLATION”， PRESS “OK”

向下进入“SYSTEM SETTING”， PRESS OK

按遥控器上左下脚的“红色”键，进入改KEY菜单。

按遥控器右键6次，“CA TAPY” 显示“Nagra 2"

按向下键1次，到“Paovider" 栏，按遥控器右键1次，到“0001 Di$hNetwork"

按向下键到：KEY00", 更改成新的KEY

按向下键到“ SAVE KEY”，保存，然后退出。

请教：我的RECEIVER--DIGIWAVE 7000, BIN 也更新了， KEY 也输入了，为啥还不能看呢？原来的台都没有了，我还需要做甚么吗？以前都是老公弄的，现在他只能通过电话骂我笨了

。请同用DIGIWAVE 7000 的大侠帮帮忙吧！

冰玫瑰 · Nov 13th, 2005, 00:05

引用:

作者: green_frog

New to the FTA. Trying to update the bin but I think pushed the button too early. Now my receiver is stuck on boot and my computer can't communicate with the receiver. Any help is appriciated. Thanks.

My reveiver is digiwave 7000.

我的机器也处于BOOT状态。

FireROR · Nov 13th, 2005, 08:18

引用:

作者: wayaya

does it make so much difference?

by the way, i google this error and find someone says it can be solved by grounding pad 1 (of flash?), do you think i should try it? thanks

Yes. even 6' and 7' are making a lot of different. As short as possilbe for the jtag cable.

XBPS2 · Nov 13th, 2005, 13:35

引用:

作者: HHH

请教高人，为什么频道号变了，原来1-251,现在359-617？　用起来不方便了。

用Channel Manager把1-251删掉就好了。或者干脆全部删掉，然后重新Scan Channel.

XBPS2 · Nov 13th, 2005, 13:58

引用:

作者: vvc

请教：我的RECEIVER--DIGIWAVE 7000, BIN 也更新了， KEY 也输入了，为啥还不能看呢？原来的台都没有了，我还需要做甚么吗？以前都是老公弄的，现在他只能通过电话骂我笨了

。请同用DIGIWAVE 7000 的大侠帮帮忙吧！

先Antenna Setup，然后Channel Scan。

vvc · Nov 13th, 2005, 16:26

引用:

作者: XBPS2

先Antenna Setup，然后Channel Scan。

Yes, I went to the "Antenna Setup"---change the Sat to ECHO121, the "Universal", the "9750, 10600"( the color change to grey), then the rest are set to "none".
Then, I went to the "channel Search", add the new TP nubmers(such as 12074, 20000....), then do the channel seach and always got message of "No program found".

Not working and don't know what to do!

I notice the "position" on this menu is "Disable" and in grey (no way to change it). Not sure if this matters.

Please advice!!

Thanks!!

Surrey · Nov 13th, 2005, 16:43

引用:

作者: vvc

Yes, I went to the "Antenna Setup"---change the Sat to ECHO121, the "Universal", the "9750, 10600"( the color change to grey), then the rest are set to "none".
Then, I went to the "channel Search", add the new TP nubmers(such as 12074, 20000....), then do the channel seach and always got message of "No program found".

Not working and don't know what to do!

I notice the "position" on this menu is "Disable" and in grey (no way to change it). Not sure if this matters.

Please advice!!

Thanks!!

1、看看信号质量是多少
2、确认LNB的参数，某些是10750

我不用DIGIWAVE 7000，不过好象应该不用自己输入TP吧。

Surrey · Nov 13th, 2005, 16:51

另外，如果有两个以上LNB，还要设置SWITCH，"position"应该是MOTOR的位置。

yunboo · Nov 13th, 2005, 17:09

引用:

作者: vvc

请教：我的RECEIVER--DIGIWAVE 7000, BIN 也更新了， KEY 也输入了，为啥还不能看呢？原来的台都没有了，我还需要做甚么吗？以前都是老公弄的，现在他只能通过电话骂我笨了

。请同用DIGIWAVE 7000 的大侠帮帮忙吧！

确实有几个版本不好用。
用这个（包活CHANNEL LIST 和完全使用说明），测试过，很好。
http://forums.al7bar.tk/attachment.p...4&d=1131548068

Nov 12th, 2005, 03:32	只看该作者 #181
wayaya Junior Member 注册日期: Nov 2005 帖子: 16	请教有jtag问题，拜托拜托为什么一运行wall.exe就出错:"could not acquire I/O"? 我用的是XP, administrator account, 在control panel 中LPT1口显示工作正常，另外我已把打印机卸载了.
wayaya Junior Member 注册日期: Nov 2005 帖子: 16

Nov 12th, 2005, 20:28	只看该作者 #187
fleuve Junior Member 注册日期: Jun 2005 帖子: 19 声望: 10	着急啊: 拿位大侠帮个忙! 锅和LNB是BELL的82 的,现在想看119 今天买来了PANSAT2700,下载了Ch Editor187 (Pansat 2700A),GTRom Loader v3[1].35 [pansat2700A],Pansat 2700A_050826_104_api(N), 老大们,接下来怎么办啊?
fleuve Junior Member 注册日期: Jun 2005 帖子: 19 声望: 10

Nov 12th, 2005, 21:31	只看该作者 #190
green_frog Junior Member 注册日期: Nov 2005 帖子: 1 声望: 10	Help please! New to the FTA. Trying to update the bin but I think pushed the button too early. Now my receiver is stuck on boot and my computer can't communicate with the receiver. Any help is appriciated. Thanks. My reveiver is digiwave 7000.
green_frog Junior Member 注册日期: Nov 2005 帖子: 1 声望: 10

Nov 13th, 2005, 16:51	只看该作者 #199
Surrey Senior Member 注册日期: Aug 2004 帖子: 244 声望: 906943	另外，如果有两个以上LNB，还要设置SWITCH，"position"应该是MOTOR的位置。
Surrey Senior Member 注册日期: Aug 2004 帖子: 244 声望: 906943