共享DIY经验-Nissan Maxima Spark Plug(zt)

tco · Dec 1st, 2005, 09:48

HOW TO CHANGE SPARK PLUGS ON 5TH GENERATION(2000-2003)
I waited till 66000 miles to change the plugs. I can definitely feel a difference in the way the car drives.
There are a few different brands of spark plugs in the market, but save your self the $ and the hassle and stick with the NGK’s. I just purchased the NGK from CT, for $8.80 a pair. You can get the standard, cold or hot type NGK spark plugs. I just got the standard ones.
TOOLS NEEDED:
6 NGK plugs
4mm Allen wrench, or a driver with 4mm Allen extension
5/8 spark plug socket
10" socket extension
10" socket
Universal joint, I used a small and a big one
Torque wrench
Anti seize
A magnetic rod
(图1)
INSTRUCTIONS
1.Use the 4mm Allen wrench to take off the cover. There are 4 screws to take off.
(图2&图3 )
2.Using a 10" socket remove the three bolts.
(图4 )
3.Gently pull and shake at the same time, to get off the ignition coils. You will be able to see the spark plug sitting in there. Use the extension with the spark plug socket, and universal joint to unscrew and pull out the spark plug. Do the same with all three plugs. The new plugs are pre-gapped. But check to make sure they are 0.44. Use the torque wrench and tighten them to 14-22 lbs.
(图5 )
4.Now the easy part is done. The rear plugs are pretty hard to get to, especially #5. I will recommend that you stretch your back and thighs; otherwise you might pull a muscle . Careful not to scratch the FSTB. You can take it off, I didn’t cause it doesn’t really interfere with the plug change. You will need the magnetic rod to get out the spark plugs, once they are loosened.
(图6 图7 图8 图9)
5.Replace #4, 5, and 6. Tighten all the bolts holding in place the ignition coils. Put the tacks, wires and cable back in place. Put the cover back on the front 3 coils. Take off all the tools from the engine. Start the car. Enjoy the ride.
(图10)
These installation instructions are only for reference. I am not responsible for any damages or problems this install, causes to you or your car.

tco · Dec 1st, 2005, 11:54

MORE Pictures

Dec 1st, 2005, 09:48	#1
tco 成都袍哥注册日期: Feb 2005 帖子: 55	共享DIY经验-Nissan Maxima Spark Plug(带示意图) HOW TO CHANGE SPARK PLUGS ON 5TH GENERATION(2000-2003) I waited till 66000 miles to change the plugs. I can definitely feel a difference in the way the car drives. There are a few different brands of spark plugs in the market, but save your self the $ and the hassle and stick with the NGK’s. I just purchased the NGK from CT, for $8.80 a pair. You can get the standard, cold or hot type NGK spark plugs. I just got the standard ones. TOOLS NEEDED: 6 NGK plugs 4mm Allen wrench, or a driver with 4mm Allen extension 5/8 spark plug socket 10" socket extension 10" socket Universal joint, I used a small and a big one Torque wrench Anti seize A magnetic rod (图1) INSTRUCTIONS 1.Use the 4mm Allen wrench to take off the cover. There are 4 screws to take off. (图2&图3 ) 2.Using a 10" socket remove the three bolts. (图4 ) 3.Gently pull and shake at the same time, to get off the ignition coils. You will be able to see the spark plug sitting in there. Use the extension with the spark plug socket, and universal joint to unscrew and pull out the spark plug. Do the same with all three plugs. The new plugs are pre-gapped. But check to make sure they are 0.44. Use the torque wrench and tighten them to 14-22 lbs. (图5 ) 4.Now the easy part is done. The rear plugs are pretty hard to get to, especially #5. I will recommend that you stretch your back and thighs; otherwise you might pull a muscle . Careful not to scratch the FSTB. You can take it off, I didn’t cause it doesn’t really interfere with the plug change. You will need the magnetic rod to get out the spark plugs, once they are loosened. (图6 图7 图8 图9) 5.Replace #4, 5, and 6. Tighten all the bolts holding in place the ignition coils. Put the tacks, wires and cable back in place. Put the cover back on the front 3 coils. Take off all the tools from the engine. Start the car. Enjoy the ride. (图10) These installation instructions are only for reference. I am not responsible for any damages or problems this install, causes to you or your car. 此帖于 Jun 22nd, 2010 23:16 被 tco 编辑。
tco 成都袍哥注册日期: Feb 2005 帖子: 55

Dec 1st, 2005, 11:54	只看该作者 #2
tco 成都袍哥注册日期: Feb 2005 帖子: 55 声望: 45	more pics MORE Pictures 此帖于 Jun 22nd, 2010 23:16 被 tco 编辑。
tco 成都袍哥注册日期: Feb 2005 帖子: 55 声望: 45