温故而知新:没锅的日子真难受，有无卫视烧友，交流一下(9)

[prchina]

十分感谢,我的110和119现在都搜出来了.
又有一个问题,MT能不能按照channel number排序?我现在只有频道名称,看不到number.

作者: bmw325i

你看看，时不时所有的HORIZANTAL的 TP都搜不出来？VERTICAL 的都可以？ 如果是那样的话，你需要用25600-TP（H）=XXXXX，然后把H改成V。 如果是KU 星（比如118，121），要用24600。

比如，你的TP是11414 H 20000 5/6 如果是110，1...

[prchina]

118.7还是不成.
用commited LNB3或uncommited lnb3都不成.
118.7是119k - amc-16吗? 我用得是那个2414.ini.

作者: bmw325i

你要把SWITCH设置成XXX-LNB3，（忘了具体名字了，就是最前面那个NOT COMITTED 3）然后把SW那项设置成1170000，这是对118。7的，

如果是110，119，要把SW设置成DISHPRO 。

然后SCAN的时候还要把H 的TP转换成V。

我用的是MT

[zsnow]

作者: tomgod

仔细看贴，你的LNB错了

我的lnb支持118的阿，买的时候老板说的。型号是cst-11g, 频率11.7-12.75G ,LO是10750，

[misc123]

作者: zsnow

我的lnb支持118的阿，买的时候老板说的。型号是cst-11g, 频率11.7-12.75G ,LO是10750，

18" 锅 or 33" 锅 ?
118.7 要用 33" 锅

[FireROR]

MT 3.38不是已经支持DPPro了么.LOF 11250,后面2选14xxx的就可以了,不需要转换

[lake_ontario2000]

买了Captive Works 700S, 33" dish,两个LNBF, 一个是用于己于人118.7W , 一个是用于己于
110W, 还买了4 lnbf dish Bracket. 全部安装完后, 开机. strength :69, Quality:0

这是舍问题? newbie, please help.

thanks

[oasis]

作者: zsnow

我的lnb支持118的阿，买的时候老板说的。型号是cst-11g, 频率11.7-12.75G ,LO是10750，

only one lnb?

[misc123]

作者: lake_ontario2000

买了Captive Works 700S, 33" dish,两个LNBF, 一个是用于己于人118.7W , 一个是用于己于
110W, 还买了4 lnbf dish Bracket. 全部安装完后, 开机. strength :69, Quality:0

这是舍问题? newb...

1. Not pointing to the satellite - Adjust Azimuth & Elevation.

2. Wrong Diseqc setting, i.e. LNB1, LNB2 ... etc. under Antenna Setting.

Edit:
One more thing:
33" dish cannot skew, cannot use "4 lnbf dish Bracket"

[oasis]

作者: lake_ontario2000

买了Captive Works 700S, 33" dish,两个LNBF, 一个是用于己于人118.7W , 一个是用于己于
110W, 还买了4 lnbf dish Bracket. 全部安装完后, 开机. strength :69, Quality:0

这是舍问题? newb...

用于己于人 啥意思？

应该是根本没对准，先对119，再微调118，最后在左侧加一个110。

Captive Works 700S如果找到星，会在右下角显示卫星的名字。

[lake_ontario2000]

谢谢.
我没有用Diseqc setting, the cable connect to my box directly. I tried to position
118.7W, no signal. I will try hard.

thank you

[zsnow]

作者: oasis

only one lnb?

18" 锅 or 33" 锅 ?
118.7 要用 33" 锅

回答前面两位
之前用的是1个lnb,搜不到118.7的信号，现在刚放了110的lnb在旁边并且加了4x1 switch，现在奇怪的是110明明有信号Q 40左右，可以搜索的时候告诉我没有信号。郁闷

可能是我锅小了，25寸的bell锅，锅质量还不错。

[misc123]

作者: zsnow

回答前面两位
之前用的是1个lnb,搜不到118.7的信号，现在刚放了110的lnb在旁边并且加了4x1 switch，现在奇怪的是110明明有信号Q 40左右，可以搜索的时候告诉我没有信号。郁闷

可能是我锅小了，25寸的bell锅，锅质量还不错。

25" too small to pick up signal from 118.7.
You need a 30" or larger.

[misc123]

作者: lake_ontario2000

谢谢.
我没有用Diseqc setting, the cable connect to my box directly. I tried to position
118.7W, no signal. I will try hard.

thank you

Try to get 119W first then 118.7, like oasis said.
Don't use the "4 lnbf dish Bracket", put the 118/119 LNB direct on the arm.

[lake_ontario2000]

One more thing, i did not import the latest bin to my CW-700s?
Does it matter?

thanks

[misc123]

作者: lake_ontario2000

One more thing, i did not import the latest bin to my CW-700s?
Does it matter?

thanks

bin file has nothing to do with the "Quality & Strength" but you need it to de-scramble the signals to give you TV to watch.

[lake_ontario2000]

i bought this one :
http://transatelectronics.com/store/...b-bracket_P228
or i should buy this one: http://transatelectronics.com/store/...t-bracket_P234 ?

any input?

thanks

[misc123]

This one
http://transatelectronics.com/store/...t-bracket_P234
is enough for 118/119 + 110 on a 33" dish

[lake_ontario2000]

but i already bought this one:
http://transatelectronics.com/store/...b-bracket_P228

Does this work>

thank you

[misc123]

Same as the P234, just let you put up more LNBs.
Put the 118/119 on the arm, find the 119 and fine tune for 118.7
Then add the second LNB for 110w on the west side of the 118/119
Mind you that it's not easy to adjust the 110W with this bracket.

Edit:
When you get the quality, make sure the Satellite name shows up on top of Quality is the Satellite you want.
e.g. Found: EchoStar 7 (119W) or Anik F3 (118.7W) or EchoStar 6,8 (110.0W)

Edit 2:
If you add the 110.0W, you need a Diseqc 4x1 or a 22KHz tone switch or SW21 and change the Diseqc Numbers (LNB1, LNB2...) accordingly in the Antenna Setting.

[lake_ontario2000]

thanks lot.

I got it.