温故而知新:没锅的日子真难受，有无卫视烧友，交流一下(3)

f_g · Sep 20th, 2006, 11:06

now it is dark again,relax time. I posted the question in the closed thread.
I post here again ,just want to ask if anybody know how to reset the disec?or any possible suggestion for this. or any experience by using two lnb to receive 121 and 110. thanks

thanks
引用:
作者: Anaconda
did you reset the disec setting in your receiver? try to connect only your 110 lnb to your receiver and try. should be easy enough.

引用:
作者: f_g
question for receiving 121 and 110 under one dish
my dish is aimed at 121,I used to receive 121/110 under one dish by two lnb before this july blackout.
I uploaded the lastest bin for my pantec. now everything is back in 121. but 110 signal somehow quality is 0, even I moved around lnb. still nothing happened. as I remember last time I moved ,it was easy to sense signal from 110. please any DX could give me any suggestion. thanks

f_g · Oct 2nd, 2006, 09:00

引用:

作者: River_Lake

求助, 俺今天试着一锅两星, 121在图中右边, 110在图中左边, 但最后110总是有强度50-60之间, 质量为0!

大侠们给看看? 多谢先!

[IMG]http://www.chinasmile.net/g...

very nice.
where can I buy this rack to receive both 121 and 110?

f_g · Oct 3rd, 2006, 15:17

I heard BL released 280t new bin. anyone know where I can find it.

f_g · Oct 4th, 2006, 09:08

引用:

作者: f2a

You mean Pansat 1500A V280 right ?

Check this

http://www.51fta.com/showthread.php?p=274#post274

Thanks f2a.
I have another question.(sorry I don't have chinese in the office's pc).
I used to receive 110/121. but since July I couldn't receive 110 anymore. I checked 4x1 disq switch by trying pluging 121 cable to 4 ports,just found only one port (121 was using), was working. is it normal that 3 ports were broken or anything do I miss to check?I bought all device last year.

f_g · Oct 4th, 2006, 11:49

引用:

作者: f2a

Switch 现在是个超便宜的东西,质量也就可想而知了,并且放在屋外雨淋的,出问题的可能性很大,我的都换了几个了.

可以去掉switch直接连110到receiver如果可以收到信号,就是switch的问题.

I will try after I back home.

f_g · Oct 17th, 2006, 09:58

我昨天刚刚买了一个switch.我要同时接收110和121.
如果直接连接121LNB或110LNB，都没问题.
如果用switch, 我只能看到121.但看不到110.-- 121 quality是60% １１０的quality是０
究竟是什么原因?敬请fta等DX扫盲.连线我试了,没问题.

我的switch说明如下
4x1 DISEqC SWITCH Ver:2.0
FREQUENCY RANGE: 900-2400MHz
INSERTIN LOSS: 3dB
Max.DC CURRENT: 0.5A
CONNECTORS: F Female
ISOLATION PORTS: >25dB

f_g · Oct 17th, 2006, 11:08

引用:

作者: f2a

switch是个没有什么技术的东西,出问题的概率不大.最有可能就是你的设置错误了,

到机器的天线设置里找110卫星然后到switch选项或有的机器叫diseqc选项里选择对应port.

如果你的110连接到了switch的port 2那就在设置里选择port 2,至于连接哪个口不是固定的,可随意...

真是扫盲了。我还真不知道设置port。I will try after work.Thanks

f_g · Oct 17th, 2006, 20:43

引用:

作者: galaha

Port 1: 121
port 2: 110

My current settings:

Sat: 121w
LNB power on
LNB type: single
LNB freq: 10.750?
22KHZ: off
Disecq: 1.0/1.1
Committed: 1
Unco...

galaha 握握手,不歧视我们盲流.
我设置PORT后, 可能是我的TP不对.
我看到有说110是TP12224,我用BLIND SCAN. 但能看到的频道没有单独接收的多?是什么原因呐?谢谢.
我用的设置是:
Sat:110
LNB type: standard
LNB freq: 11250
22KHZ: off
positioner setting 1.2
TP (1)12223V 20.000

f_g · Oct 19th, 2006, 09:13

can anybody confirm 119 has all chinese channels? I read in lyngsat.com ,it shows all in the boat.I am thinking about moving my 121 to 119.

Sep 20th, 2006, 11:06	#1
f_g Member 注册日期: Sep 2006 帖子: 32	question for receiving 121 and 110 under one dish now it is dark again,relax time. I posted the question in the closed thread. I post here again ,just want to ask if anybody know how to reset the disec?or any possible suggestion for this. or any experience by using two lnb to receive 121 and 110. thanks thanks 引用: 作者: Anaconda did you reset the disec setting in your receiver? try to connect only your 110 lnb to your receiver and try. should be easy enough. 引用: 作者: f_g question for receiving 121 and 110 under one dish my dish is aimed at 121,I used to receive 121/110 under one dish by two lnb before this july blackout. I uploaded the lastest bin for my pantec. now everything is back in 121. but 110 signal somehow quality is 0, even I moved around lnb. still nothing happened. as I remember last time I moved ,it was easy to sense signal from 110. please any DX could give me any suggestion. thanks
f_g Member 注册日期: Sep 2006 帖子: 32

Oct 3rd, 2006, 15:17	#3
f_g Member 注册日期: Sep 2006 帖子: 32 声望: 460499	pansat 280t bin I heard BL released 280t new bin. anyone know where I can find it.
f_g Member 注册日期: Sep 2006 帖子: 32 声望: 460499

Oct 17th, 2006, 09:58	#6
f_g Member 注册日期: Sep 2006 帖子: 32 声望: 460499	求助switch问题我昨天刚刚买了一个switch.我要同时接收110和121. 如果直接连接121LNB或110LNB，都没问题. 如果用switch, 我只能看到121.但看不到110.-- 121 quality是60% １１０的quality是０究竟是什么原因?敬请fta等DX扫盲.连线我试了,没问题. 我的switch说明如下 4x1 DISEqC SWITCH Ver:2.0 FREQUENCY RANGE: 900-2400MHz INSERTIN LOSS: 3dB Max.DC CURRENT: 0.5A CONNECTORS: F Female ISOLATION PORTS: >25dB
f_g Member 注册日期: Sep 2006 帖子: 32 声望: 460499

Oct 19th, 2006, 09:13	#9
f_g Member 注册日期: Sep 2006 帖子: 32 声望: 460499	r all chinese channels in 119? can anybody confirm 119 has all chinese channels? I read in lyngsat.com ,it shows all in the boat.I am thinking about moving my 121 to 119.
f_g Member 注册日期: Sep 2006 帖子: 32 声望: 460499