Mar 8th, 2012, 14:16 | #1 |
Member
注册日期: Jul 2004
帖子: 58
|
Hello 白野猪
When create an alignment in the tutorial, I can select the following settings: •Site: <None> •Alignment Style: Layout •Alignment Layer: C-ROAD •Alignment Label Set: Major Minor and Geometry Points But in the actual design, there are not many selections for settings , and only the following settings appear •Site: <None> •Alignment Style: standard •Alignment Layer: 0 •Alignment Label Set: standard Why? What should I do? |
|
Mar 8th, 2012, 18:47 | 只看该作者 #2 |
郭芙蓉的马甲
注册日期: Jun 2006
帖子: 3,192
积分:8
精华:4
声望: 3638778
|
因为tutorial使用的dwg里,已经包含了很多settings & styles。而你自己做练习建立新dwg时,没有使用正确的templates。Civil 3D安装时,带了很多templates,里面已经包含了很多settings & styles,你可以从它们开始,定制你自己的settings & styles。 当你定制自己的settings & styles时,记住不要直接修改。正确的做法是make a copy then edit the copy。 如果你想使用其它dwg里的settings & styles,可以同时打开2个文件,Pick & drop。(视版本不同,可能有所不同) |
If you cannot read above, then it's time to learn 中文.
|
|
|
Mar 8th, 2012, 22:03 | 只看该作者 #5 | |
郭芙蓉的马甲
注册日期: Jun 2006
帖子: 3,192
积分:8
精华:4
声望: 3638778
|
引用:
如果templates选的对,这些by default都设好了,自己只要微调即可。 |
|
|
Mar 15th, 2012, 19:09 | 只看该作者 #16 |
郭芙蓉的马甲
注册日期: Jun 2006
帖子: 3,192
积分:8
精华:4
声望: 3638778
|
1、先建一个空的surface,然后去prospector里,展开surface-definition,在contour上点右键,导入contours,最后rebuild即可。 2、在命令行敲UCS,然后连敲2次回车,就可以了。以后想旋转坐标系,也是用这个命令。 用civil 3D的时候,千万不要忘了随时存盘(ctrl+s),尤其是做大动作以前。比如rebuild corridor, create Xsection, etc。crash是家常便饭,recover功能是垃圾。 |
|