Oct 6th, 2006, 12:35 | #1 | |
Senior Member
注册日期: Jul 2004
帖子: 725
|
i got 110+82 on 30" while ago 引用:
|
|
|
Oct 12th, 2006, 11:52 | #2 |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
connect receiver directly to the 82lnb. you will know if the lnb is offset or the switch is gone.
|
|
Oct 24th, 2006, 10:57 | #3 |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
keyripper works perfect.
|
|
Nov 2nd, 2006, 11:33 | #4 | |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
you are not pointing at 82. re aim the dish 引用:
|
|
|
Nov 8th, 2006, 10:34 | #5 | |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
91 and 95 on 30" dish, trying to add one for 82 and another one for 110. should be ok but just no time. 引用:
|
|
|
Nov 21st, 2006, 08:53 | #6 | |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
91 should at left side of 82. 引用:
|
|
|
Nov 23rd, 2006, 09:24 | #7 | |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
仰角 is very low. even lower than 148. only guys at marintime can try. 引用:
|
|
|
Nov 23rd, 2006, 12:04 | #8 | |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
liner according to lyngsat 引用:
|
|
|
Nov 23rd, 2006, 12:07 | #9 | |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
TelStar12 : Satellite TelStar 12 - T12 Sky location 15 degree West Carrier type DVB Transponder InterNetCon Data rate 10 Mbps Frequency [MHz] 10999.7 <> 11000 Symbol Rate [MSPS] 6.336 Msps (6336 in kS/s) Polarization Vertical Bandwidth KU 22K OFF Viterbi Rate (FEC) 7/8 <> Auto DiSEqC None Modulation Qpsk LNB Type Universal Pid 7777 * Broadcast PID Not available ** Multicast PID Not available *** Coverage map http://www.internetcon.ro/html/setaredvb_en.asp and even the guys at marintime can not get it. signal level is 20 there. 引用:
|
|
|
Nov 29th, 2006, 21:24 | #10 | |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
286t 引用:
|
|
|
Dec 18th, 2006, 15:40 | #11 |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
|
|
Dec 18th, 2006, 15:42 | #12 |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
|
|
Dec 19th, 2006, 09:07 | #13 |
Senior Member
注册日期: Jul 2004
帖子: 725
声望: 1600681
|
网上有图表表示强度和建议的锅的大小,95在加拿大大多是45的强度相当于26寸。你那个应该是椭圆的锅吧。 我没试过椭圆锅,但在30寸的锅上91和95两个头贴在一起,几乎都相互干扰了,所以我认为你的小锅如果不是椭圆的没法同时收的,除非用那个最新的头线/圆同体的那个。 |
|