请教如何调车库门的行程。

[p1968]

车库门以前可以完全关闭和打开，可是最近不知道什么原因，行程乱了，只可以完全关闭，但打开时，门提升约一米左右就自己停了，即使将门与机器彻底拆开，提升器也是走到同样的位置就停下。请教高人指点如何调整其行程？谢谢！ 机器是 GENIE，Model 1022

[zayne]

操作主机上的按钮，不要用遥控器或墙控制器

CLOSE TRAVEL LIMIT
1. Press and hold the "Close Travel Limit"
until the door is fully closed.
2. You can quickly press and release the "Close
Travel Limit"
button to move the door in small
increments. You can also use the "Open Travel
Limit"
button to move the door slightly in the
UP direction.
3. Door is fully closed when the bottom edge of door
presses firmly onto the ground.
4. Once the door is in the desired position, press and
release the "Down SET Limit"
LED indicator light light will blink green once. This
stores the closed position in memory.

OPEN TRAVEL LIMIT
1. Press and hold the "Open Travel Limit"
to move the door to its fully opened position. This
starts the opener moving in the UP direction.
2. Hold the "Open Travel Limit"
door is in the fully opened position that you desire,
then release this button.
3. You can quickly press and release the "Open
Travel Limit"
button to move the door in small
increments. You can also use the "Close Travel
Limit"
button to move the door slightly in the
DOWN direction.
4. Once the door is in the desired position, press
and release the "Open SET Limit"
The LED indicator light will blink green twice.
This stores the opened position in memory

https://www.manualslib.com/manual/27...page=19#manual

[p1968]

作者: zayne

操作主机上的按钮，不要用遥控器或墙控制器

CLOSE TRAVEL LIMIT
1. Press and hold the "Close Travel Limit"
until the door is fully closed.
2. You can quickly press and relea...

非常感谢！修好了。: