返回   华枫论坛 > ◆ 工作学习◆ > 工作求职



发表新主题 回复
 
只看楼主 主题工具
旧 Jan 31st, 2005, 17:44     #1
C+C
Member
级别:2 | 在线时长:15小时 | 升级还需:6小时级别:2 | 在线时长:15小时 | 升级还需:6小时
 
C+C 的头像
 
注册日期: Nov 2004
帖子: 99
C+C is on a distinguished road
Red face 10年工装&夹具&金属成形模具&机械装置设计制造,擅长UG,I-Deas&AutoCAD,熟悉ProE&Inventor&SolidWorks,恳请推荐相关中介&COOP

1. Over 10年工装&夹具&金属成形模具&机械装置设计制造经验;
2. 擅长UG, I-Deas, and AutoCAD, 熟练I-Deas 的FEA module,熟悉ProE, Inventor & SolidWorks;
3. 用VB对MS Word/Acess,AutoCAD and SolidWorks 做过二次开发;
4. 参加过CNC机床操作和编程培训(有证书),会开机床;

路该何走&未来如何规划?
恳请各位前辈指正+提出建议+推荐相关中介&COOP。
本人在此先谢谢了!

此帖于 Jan 31st, 2005 20:58 被 C+C 编辑。

Go and go ahead ...
C+C 当前离线  
回复时引用此帖
旧 Jan 31st, 2005, 20:33   只看该作者   #2
C+C
Member
级别:2 | 在线时长:15小时 | 升级还需:6小时级别:2 | 在线时长:15小时 | 升级还需:6小时
 
C+C 的头像
 
注册日期: Nov 2004
帖子: 99
声望: 10
C+C is on a distinguished road
默认

Studying the job market and myself situation I think designer and draftspeson should be my future aim, could you, especially who are in this or relevant, give me some advices.
Thank you for your time.
C+C 当前离线  
回复时引用此帖
旧 Feb 1st, 2005, 06:47   只看该作者   #3
zhanghui
3DMaster
级别:3 | 在线时长:31小时 | 升级还需:1小时级别:3 | 在线时长:31小时 | 升级还需:1小时级别:3 | 在线时长:31小时 | 升级还需:1小时
 
注册日期: Jul 2004
住址: Toronto
帖子: 118
声望: 28
zhanghui is on a distinguished road
发送 Yahoo! 消息给 zhanghui
默认

引用:
作者: C+C
Studying the job market and myself situation I think designer and draftspeson should be my future aim, could you, especially who are in this or relevant, give me some advices.
Thank you for your time.
You have so many years of manufacturing expierence. You should focus on manufacturing engineer job postings to match your expierence.

Good luck.

3DMaster
------------------------------
http://www.geocities.com/zhanghui1998
zhanghui 当前离线  
回复时引用此帖
旧 Feb 1st, 2005, 08:10   只看该作者   #4
Johny
Senior Member
级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时
 
注册日期: Jul 2004
住址: Vancouver
帖子: 917
声望: 44452
Johny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond repute
发送 MSN 消息给 Johny 发送 Yahoo! 消息给 Johny
默认

引用:
作者: C+C
1. Over 10年工装&夹具&金属成形模具&机械装置设计制造经验;
2. 擅长UG, I-Deas, and AutoCAD, 熟练I-Deas 的FEA module,熟悉ProE, Inventor & SolidWorks;
3. 用VB对MS Word/Acess,AutoCAD and SolidWorks 做过二次开发;
4. 参加过CNC机床操作和编程培训(有证书),会开机床;

路该何走&未来如何规划?
恳请各位前辈指正+提出建议+推荐相关中介&COOP。
本人在此先谢谢了!
我们是同行, 有兴趣联系我: allcadcam@hotmail.com
Johny 当前离线  
回复时引用此帖
旧 Feb 1st, 2005, 14:35   只看该作者   #5
C+C
Member
级别:2 | 在线时长:15小时 | 升级还需:6小时级别:2 | 在线时长:15小时 | 升级还需:6小时
 
C+C 的头像
 
注册日期: Nov 2004
帖子: 99
声望: 10
C+C is on a distinguished road
默认

''You have so many years of manufacturing expierence. You should focus on manufacturing engineer job postings to match your expierence.

Good luck.
__________________
3DMaster
------------------------------
http://www.geocities.com/zhanghui1998 ''

+++++++++++++++++++++++++++++++++++++++++++++++++++++
Yes, I am focusing on mechanical engineer/designer position posted on websites and sent resumes to those agencies, I received two agencies' phone, they told me your background is perfect but you didn't have any Canadians workexperiences, sorry, talk later and bulabula.

My dear, where can I get that Canadians workexperiences if they always think so ?
C+C 当前离线  
回复时引用此帖
旧 Feb 1st, 2005, 15:06   只看该作者   #6
T2003CN
Senior Member
级别:10 | 在线时长:157小时 | 升级还需:8小时级别:10 | 在线时长:157小时 | 升级还需:8小时
 
注册日期: Jul 2004
帖子: 344
积分:2
精华:1
声望: 31857
T2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond reputeT2003CN has a reputation beyond repute
默认 ...

引用:
作者: C+C
I received two agencies' phone, they told me your background is perfect but you didn't have any Canadians workexperiences, sorry, talk later and bulabula.

My dear, where can I get that Canadians workexperiences if they always think so ?
加拿大经验只是一个说的出口的理由,要考虑一下背后真实的理由是什么.
T2003CN 当前离线  
回复时引用此帖
旧 Feb 2nd, 2005, 11:40   只看该作者   #7
yang1999
Senior Member
级别:33 | 在线时长:1235小时 | 升级还需:57小时级别:33 | 在线时长:1235小时 | 升级还需:57小时级别:33 | 在线时长:1235小时 | 升级还需:57小时级别:33 | 在线时长:1235小时 | 升级还需:57小时级别:33 | 在线时长:1235小时 | 升级还需:57小时
 
yang1999 的头像
 
注册日期: Jul 2004
帖子: 769
声望: 1425920
yang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond reputeyang1999 has a reputation beyond repute
默认

找tool/die maker之类的工作应该很好找。

HCR PERMANENT SEARCH
Automotive Trades

Job Type: Full Time
Location: Toronto, ON, CANADA;
Job Category: Skilled Trades, Automotive
Industry: Manufacturing
Company URL: http://www.hcrpermsearch.com
Year(s) of Experience: 5
Number Of Positions: 5
Date Posted: Feb 2, 2005
Contact E-mail: resumes@hcr.ca

HCR Permanent Search is a dedicated search firm specializing in placing Top Talent in the right positions, and we have established ourselves as one of the top technical recruitment firms in Canada. Magna International has partnered with HCR Permanent Search as it’s preferred supplier for their recruitment needs. We specialize in permanent as well as contract placements and work in a diverse area of competencies including Skilled Trades to Engineering and Finance to GM level positions within the automotive industry.


HCR Permanent Search, your conduit to Magna.

Our client, a large Tier 1 automotive parts manufacturer is seeking the following positions for various shifts:

1) Millwrights
2) Electricians
3) Tool & Die Makers
4) Facilities Maintenance

All positions require candidates posessing a licence.

Please submit your resume in confidence to resumes@hcr.ca


We thank all applicants, however only those qualified will be contacted.







Extrusion Die and Mold Developer

Job Type: Full Time
Location: Toronto - West, ON, CANADA;
Job Category: Engineering, Manufacturing, Automotive
Industry: Recruitment/Staffing
Company URL: http://www.quantum.ca
Date Posted: Feb 1, 2005
Contact E-mail: ttablante@quantum.ca

Extrusion Die and Mold Developer
$45,000 - $50,000

Our client seek an Extrusion Die and Mold Developer to join their Production Services Team.

This is an immediate opening which is responsible for development of: ideas for extrusion dies/splicing molds and the necessary tooling required for specific product and applications. You will also help with design of new extrusion dies and splicing molds using AutoCAD, as well be re responsible for construction, testing/trialing and modification of dies. You will work closely with the Project engineer and the machinists, and interact daily with the Plant Manager, Plant Engineer, Department Supervisors and plant staff.

Qualfiications:
- 1 - 3 years experience in deie design for rubber or plastic extrusion
- knowledge of AutoCAD, Inventory (or Solidworks)
- hands on experience using carious rools and equipment found in a machine shop
- familiar with wire EDM and CNC Milling machines and techniques

Ted Tablante
Tel: 416.226.5685 X 226
Fax: 416.226.0364
ttablante@quantum.ca

We appreciate all expressed interest in this position. Only those candidates selected for interview will be contacted. You would always be contacted and presented an opportunity before your resume is submitted to any of our clients.









引用:
作者: C+C
1. Over 10年工装&夹具&金属成形模具&机械装置设计制造经验;
2. 擅长UG, I-Deas, and AutoCAD, 熟练I-Deas 的FEA module,熟悉ProE, Inventor & SolidWorks;
3. 用VB对MS Word/Acess,AutoCAD and SolidWorks 做过二次开发;
4. 参加过CNC机床操作和编程培训(有证书),会开机床;

路该何走&未来如何规划?
恳请各位前辈指正+提出建议+推荐相关中介&COOP。
本人在此先谢谢了!
yang1999 当前离线  
回复时引用此帖
旧 Feb 2nd, 2005, 12:43   只看该作者   #8
C+C
Member
级别:2 | 在线时长:15小时 | 升级还需:6小时级别:2 | 在线时长:15小时 | 升级还需:6小时
 
C+C 的头像
 
注册日期: Nov 2004
帖子: 99
声望: 10
C+C is on a distinguished road
默认

Thank you, Johny, T2003CN and Yang1999, thank you very much!
I greatly appreciate your timely help.

I'm going to prepare for those position !
C+C 当前离线  
回复时引用此帖
旧 Feb 3rd, 2005, 21:28   只看该作者   #9
liuz
Junior Member
级别:0 | 在线时长:0小时 | 升级还需:5小时
 
注册日期: Jul 2004
帖子: 20
声望: 0
liuz is an unknown quantity at this point
默认

引用:
作者: T2003CN
加拿大经验只是一个说的出口的理由,要考虑一下背后真实的理由是什么.
I agree!

I believe most of immigrants have at least one interview within half or one year.

I personally think China's education and expereince are recognized in Canada. Otherwise, you never have an interview.

There is really a gooooood guy called "Johnny". Try to contact him and further study your behind.
liuz 当前离线  
回复时引用此帖
旧 Feb 6th, 2005, 22:11   只看该作者   #10
C+C
Member
级别:2 | 在线时长:15小时 | 升级还需:6小时级别:2 | 在线时长:15小时 | 升级还需:6小时
 
C+C 的头像
 
注册日期: Nov 2004
帖子: 99
声望: 10
C+C is on a distinguished road
默认 Hi, Johny, I've sent email to you !

I'm look forward to hearing from you!
Thank you for your inviting ! I wish everyone here a very happy future.
C+C 当前离线  
回复时引用此帖
旧 Feb 7th, 2005, 21:19   只看该作者   #11
tyghbn
***
级别:0 | 在线时长:0小时 | 升级还需:5小时
 
注册日期: Jul 2004
帖子: 179
声望: 48
tyghbn is on a distinguished road
默认

引用:
作者: C+C
1. Over 10年工装&夹具&金属成形模具&机械装置设计制造经验;
2. 擅长UG, I-Deas, and AutoCAD, 熟练I-Deas 的FEA module,熟悉ProE, Inventor & SolidWorks;
3. 用VB对MS Word/Acess,AutoCAD and SolidWorks 做过二次开发;
4. 参加过CNC机床操作和编程培训(有证书),会开机床;

路该何走&未来如何规划?
恳请各位前辈指正+提出建议+推荐相关中介&COOP。
本人在此先谢谢了!
你肯定有工作!我10000%确信!call me!
tyghbn 当前离线  
回复时引用此帖
旧 Feb 8th, 2005, 14:24   只看该作者   #12
C+C
Member
级别:2 | 在线时长:15小时 | 升级还需:6小时级别:2 | 在线时长:15小时 | 升级还需:6小时
 
C+C 的头像
 
注册日期: Nov 2004
帖子: 99
声望: 10
C+C is on a distinguished road
默认 Happy new year!

Rooster means luck and confidence, next year is Chinese Rooster's Year, I wish everyone here have a lucky,good and happy future!

Thank thghpn's cheering me on, I'll do my best.
C+C 当前离线  
回复时引用此帖
旧 Feb 8th, 2005, 15:24   只看该作者   #13
Johny
Senior Member
级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时级别:43 | 在线时长:2032小时 | 升级还需:80小时
 
注册日期: Jul 2004
住址: Vancouver
帖子: 917
声望: 44452
Johny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond reputeJohny has a reputation beyond repute
发送 MSN 消息给 Johny 发送 Yahoo! 消息给 Johny
Talking

引用:
作者: tyghbn
你肯定有工作!我10000%确信!call me!
How could you so sure?
Johny 当前离线  
回复时引用此帖
旧 Feb 8th, 2005, 20:31   只看该作者   #14
tyghbn
***
级别:0 | 在线时长:0小时 | 升级还需:5小时
 
注册日期: Jul 2004
帖子: 179
声望: 48
tyghbn is on a distinguished road
默认

引用:
作者: Johny
How could you so sure?
because you helped me, his background much more better than me
tyghbn 当前离线  
回复时引用此帖
旧 Feb 26th, 2005, 12:01   只看该作者   #15
alatse
Senior Member
级别:7 | 在线时长:81小时 | 升级还需:15小时级别:7 | 在线时长:81小时 | 升级还需:15小时级别:7 | 在线时长:81小时 | 升级还需:15小时
 
注册日期: Jul 2004
帖子: 455
声望: 247028
alatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond reputealatse has a reputation beyond repute
默认

引用:
作者: C+C
1. Over 10年工装&夹具&金属成形模具&机械装置设计制造经验;
2. 擅长UG, I-Deas, and AutoCAD, 熟练I-Deas 的FEA module,熟悉ProE, Inventor & SolidWorks;
3. 用VB对MS Word/Acess,AutoCAD and SolidWorks 做过二次开发;
4. 参加过CNC机床操作和编程培训(有证书),会开机床;

路该何走&未来如何规划?
恳请各位前辈指正+提出建议+推荐相关中介&COOP。
本人在此先谢谢了!
你太强了,直接找工作,太容易了,至少15$/HR起,MOLDMASTER 公司就每天招你这样的人.或者随便到一些MOLD INJECTION 公司去问,立即就上班.
alatse 当前离线  
回复时引用此帖
旧 Feb 26th, 2005, 15:32   只看该作者   #16
老山东
Senior Member
级别:16 | 在线时长:332小时 | 升级还需:25小时级别:16 | 在线时长:332小时 | 升级还需:25小时级别:16 | 在线时长:332小时 | 升级还需:25小时级别:16 | 在线时长:332小时 | 升级还需:25小时
 
老山东 的头像
 
注册日期: Jul 2004
帖子: 675
声望: 5968
老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute老山东 has a reputation beyond repute
默认

引用:
作者: C+C
1. Over 10年工装&夹具&金属成形模具&机械装置设计制造经验;
2. 擅长UG, I-Deas, and AutoCAD, 熟练I-Deas 的FEA module,熟悉ProE, Inventor & SolidWorks;
3. 用VB对MS Word/Acess,AutoCAD and SolidWorks 做过二次开发;
4. 参加过CNC机床操作和编程培训(有证书),会开机床;

路该何走&未来如何规划?
恳请各位前辈指正+提出建议+推荐相关中介&COOP。
本人在此先谢谢了!
如果能找到工作,通知我一声。我不是模具设计,但是会的内容差不多。
老山东 当前离线  
回复时引用此帖
旧 Feb 27th, 2005, 20:28   只看该作者   #17
C+C
Member
级别:2 | 在线时长:15小时 | 升级还需:6小时级别:2 | 在线时长:15小时 | 升级还需:6小时
 
C+C 的头像
 
注册日期: Nov 2004
帖子: 99
声望: 10
C+C is on a distinguished road
默认 Thank you everyone for your help !

Thank you everyone for your help !

I'm going to take part in a COOP program, see you after 5 months !
C+C 当前离线  
回复时引用此帖
发表新主题 回复

主题工具

发帖规则
不可以发表新主题
不可以发表回复
不可以上传附件
不可以编辑自己的帖子

启用 BB 代码
论坛启用 表情符号
论坛启用 [IMG] 代码
论坛禁用 HTML 代码



所有时间均为格林尼治时间 -4。现在的时间是 10:23

请尊重文章原创者,转帖请注明来源及原作者。
凡是本站用户自行发布的任何信息,皆不代表本站的立场,
华枫网站不确保各类信息的正确性和可靠性,也不承担由此而导致的任何直接或间接损失以及任何法律责任。

Copyright © 1999-2024 Chinasmile