温故而知新:没锅的日子真难受，有无卫视烧友，交流一下(5) - 第34页

suncor · Jul 30th, 2007, 13:36

引用:

作者: yunboo

换用这个lnb ("http://cgi.ebay.ca/CB2008-CIRCULAR-DUAL-LNB-LNBF-118W-Dish-NET-Bell-Vu-BEV_W0QQitemZ230154147499QQihZ013QQcategoryZ11726QQcmdZViewItem&...

Thanks yunboo and 豆豆2005 as well.

gwd115 · Jul 30th, 2007, 14:10

引用:

作者: yunboo

换用这个lnb ("http://cgi.ebay.ca/CB2008-CIRCULAR-DUAL-LNB-LNBF-118W-Dish-NET-Bell-Vu-BEV_W0QQitemZ230154147499QQihZ013QQcategoryZ11726QQcmdZViewItem&...

请问用"CB2008 CIRCULAR DUAL LNB LNBF"收118.7和119要多的锅?20寸的锅可以吗?

sillybearcat · Jul 30th, 2007, 15:22

引用:

作者: gwd115

请问用"CB2008 CIRCULAR DUAL LNB LNBF"收118.7和119要多的锅?20寸的锅可以吗?

20的DISH可以,信号的临界水平,在TRONTO和OTTAWA可以,再北边没有试过.

但问题是你如何把这个LNB固定在DISH上,你需要一个UNIVERSAL HOLDER.

zhouziren1 · Jul 30th, 2007, 16:28

谢谢锅王。

CaptiveworksNewBie · Jul 30th, 2007, 22:32

刚进了一台FTA:Captiveworks 600s premium. 本想找121，发现被部分遮挡，只好找110，信号强度70，但是质量为零，于是决定先更新最新的bin，可是连上串口，运行更新程序,开始之后发现始终进度为零！忙活了一天一无所获，郁闷至极，各位前辈，请帮我看一下是什么问题把...

yunboo · Jul 30th, 2007, 23:08

只能明确一点，楼上的卫星没有对上。（１１０的信号强度很大很大，但是意义不大，　要看质量。）
Captiveworks 600s premium不熟悉帮不上。另外建议楼上把操作的详细步骤写清楚，包括cable型号，Bin文件全名，以方便其他熟悉此机的人检查你的操作判断问题的根源。

CaptiveworksNewBie · Jul 30th, 2007, 23:27

多谢Yunboo这么快的回应,

我是按照这里推荐的一个网站查的角度，仰角调锅(33")的，然后把universal lnb顺时针调了１５度左右，然后找了几个的110的tp频率，但是质量仍然是零，又微调了锅，没有改善.

我的文件是从CaptiveWorks官方网站下载的，文件名是W600PV1.09_Reocrder_2_20_07.bin.确认串口线插的很牢.

yunboo · Jul 31st, 2007, 00:00

I dont know what do you have and what settings you did in ur receiver.

here is step by step loading guide, hope these can help

-------------------------------------------------------------------------------

CW600s Premium S/W Upgrade Guide!

Tools Need to update your receiver CW600s Premium Receiver:

1- Null Modem Cable
2- get the Newest bin in the download section of the forum. Make sure it is for Premium model.
3- Loading Software "Loader v1.05.zip"-edit abor- or use the 1.06 loader.

Create a folder on you PCs desktop name "CW_Premium" using Winzip or Winrar unziping program to unzip all files to "CW_Premium" folder.

1) Connect your PC and receiver with twisted RS-232C Null modem cable.

2) Power off the receiver from the back switch.

3) You can load bin file using two methods “boot” Mod and "Standby" Mod. If you want to load the sofware using "Standby" Mod go to #4.
Here how you get into “boot”MOD:
Hold power button on the front of the receiver and turn the power ON from the back of the receiver. You will see a word “boot” on the front LCD screen of the receiver.

4) Turn receiver Off from the back and then ON the receiver; you will see 00:00 now press "POWER" key on front of the receiver panel to make it standby, the LED dot will display “- - : - -“.

5) Start New LoaderV1.05.exe check if the right COM port is selected then select
<Download Main S/W>, press <Open> and select the bin file,“CX_Kround_600Perminum_V1.XX_date.bin" then click <Start>, upgrade will begin.

6) After finishing, the receiver LED will display "-End"
If your experience any problem during the upgrade start over again.

Here is a guide to Scan your Satellites
Connect your sat cable to your receiver and hook up your receiver to your TV set. You can scan Single or Multiple satellites for channels at the same time.
Single Satellite search can be done by going to:
Main Menu -> Installation -> Antenna Setup -> Select the satellite you want to scan for channels and press “Red” key on your remote
Here are typical Configuration settings for a DSS LNB

Antenna Setting

Satellite name 22 Echostar 6,8 (110W)
Transponder 12224 / V / 20000 / 5 / 6
LNB Freq 11250
LNB Type Normal
22 KHz Off
Diseqc Number LNB1
Legacy SW Off
Motorized System None

You can use “Legacy switch” by changing it to “SW21 Dish1” and changing Diseqc Number back to NONE.
-After you have done changing the configuration according to your setup press “RED” key on you remote. It will start scanning all of the channels for that particular satellite.
-You can also access Blind Scan feature from the same screen by pressing “Yellow” key from your remote.
-If you want to scan only one transponder then press “Blue” key from your remote.

Multiple Satellites Scan
You can scan maximum 4 satellites at a same time using easy tuning feature available in New OSD
Main Menu -> Installation -> Easy Tuning
Here is a typical setup for multiple satellites using Easy Tuning feature:

Status Satellite name Diseqc LNB Freq

OnEcho 3LNB1 11250
On Echo 6,8LNB2 11250
OnEcho 7LNB3 11250
OnNimiq 1,3LNB4 11250

To go from Status to Satellite name scroll down until you see Satellite name field get highlighted then use right/Left key to change satellite you want scan; now scroll down again until you get to Diseqc switch setting change it to whatever your switch setting; scroll down to LNB Frequency setting and change it to appropriate frequency.

After you have finished configuring all Satellites press OK key using right or left press “Fast Tuning” or “Auto Tuning” system will start scanning all of the satellites one by one.

Enable the Patch
To watch scrambled channels you must Enable the patch
Exit all menus, Press F1 key; the LED will display 'H', then press '000'

please stick this for me here,ty.

yunboo · Jul 31st, 2007, 00:06

latest bin name for CW600SP should be "CW600PV1.41_14062007.bin" or "CW600PV1.42.bin", both are working for now.

f2a · Jul 31st, 2007, 08:46

引用:

作者: CaptiveworksNewBie

多谢Yunboo这么快的回应,

我是按照这里推荐的一个网站查的角度，仰角调锅(33")的，然后把universal lnb顺时针调了１５度左右，然后找了几个的110的tp频率，但是质量仍然是零，又微调了锅，没有改善.

我的文件是从CaptiveWorks官方网站下载的，文件名是...

要用Null Modem Cable,如果是买机器的时候带的cable应该没有问题.

步骤是

1,关闭机器用data cable把机器和电脑连好
2,打开机器电源,等机器启动完毕后按机器面板上的power开关或遥控器上的power开关把机器转成stand by状态,就是机器前面的灯显示"--:--"
3,运行loader,选择要刷的软件,点击开始下载,一直要等待全部刷完,机器会显示End,然后关闭机器电源拔掉线.就可以了.

估计你没有把机器转换成stand by状态.

f2a · Jul 31st, 2007, 14:22

游戏开始了.

豆豆2005 · Jul 31st, 2007, 14:57

引用:

作者: f2a

游戏开始了.

怎么个意思？没得看了？

豆豆2005 · Jul 31st, 2007, 15:23

刚查了一下，是不是今早换K了？

zdq · Jul 31st, 2007, 17:08

引用:

作者: 豆豆2005

刚查了一下，是不是今早换K了？

DN all scrambled. :-( New key? How about BEV?

CaptiveworksNewBie · Jul 31st, 2007, 17:11

多谢yunboo和锅王，刚刚把最新的bin文件写到receiver里去了，不知道是更新了loader1.06的原因还是在boot状态更新的原因。

CaptiveworksNewBie · Jul 31st, 2007, 17:21

还有一个问题，要收110，是不是必须要circular LNB, 我的是Fortec Universal Single LNBF. Spec as follows:

Input: low: 10.7-11.70, LO 9.75, GAIN 56, v 0.7
high:11.7-12.75, LO 10.6, GAIN 56, v 0.7

多谢了

bian · Jul 31st, 2007, 17:27

haha

f2a · Jul 31st, 2007, 17:33

引用:

作者: CaptiveworksNewBie

还有一个问题，要收110，是不是必须要circular LNB, 我的是Fortec Universal Single LNBF. Spec as follows:

Input: low: 10.7-11.70, LO 9.75, GAIN 56, v 0.7
hig...

Universal的也可以用,到机器里设置LNB type为Universal就是了.

arvyham · Jul 31st, 2007, 17:46

121 卫星，上午还有，下午没有了。
声音图象全无，信号强度、质量都在。

51FTA的网沾也木得啦。

大家到哪找BIN呢？BIN就是密码？

welcomeback · Jul 31st, 2007, 17:56

引用:

作者: arvyham

121 卫星，上午还有，下午没有了。
声音图象全无，信号强度、质量都在。

51FTA的网沾也木得啦。

大家到哪找BIN呢？BIN就是密码？

刚去download最新BIN文件,也不管用,这次不知道要等多久.
http://www.freedomfta.net/

Jul 30th, 2007, 16:28	只看该作者 #664
zhouziren1 Senior Member 注册日期: Dec 2004 帖子: 223 声望: 413	谢谢锅王。
zhouziren1 Senior Member 注册日期: Dec 2004 帖子: 223 声望: 413

Jul 30th, 2007, 22:32	只看该作者 #665
CaptiveworksNewBie Junior Member 注册日期: Jul 2007 帖子: 7 声望: 0	前辈请帮帮我这个fta的newbie把刚进了一台FTA:Captiveworks 600s premium. 本想找121，发现被部分遮挡，只好找110，信号强度70，但是质量为零，于是决定先更新最新的bin，可是连上串口，运行更新程序,开始之后发现始终进度为零！忙活了一天一无所获，郁闷至极，各位前辈，请帮我看一下是什么问题把...

Jul 31st, 2007, 17:27	只看该作者 #677
bian Senior Member 注册日期: Jul 2004 帖子: 256 积分:2 精华:1 声望: 101097631	hoho haha

Jul 31st, 2007, 17:46	只看该作者 #679
arvyham Senior Member 注册日期: Jul 2004 帖子: 735 声望: 554866	121是不是换密码了？ 121 卫星，上午还有，下午没有了。声音图象全无，信号强度、质量都在。 51FTA的网沾也木得啦。大家到哪找BIN呢？BIN就是密码？
arvyham Senior Member 注册日期: Jul 2004 帖子: 735 声望: 554866

Jul 30th, 2007, 23:08	只看该作者 #666
yunboo ▂ ▂ ▃ ▄ ▅ ▆ 注册日期: Jul 2004 住址: ROD 帖子: 3,292 积分:5 精华:5 声望: 78577954	只能明确一点，楼上的卫星没有对上。（１１０的信号强度很大很大，但是意义不大，　要看质量。） Captiveworks 600s premium不熟悉帮不上。另外建议楼上把操作的详细步骤写清楚，包括cable型号，Bin文件全名，以方便其他熟悉此机的人检查你的操作判断问题的根源。

Jul 30th, 2007, 23:27	只看该作者 #667
CaptiveworksNewBie Junior Member 注册日期: Jul 2007 帖子: 7 声望: 0	多谢Yunboo这么快的回应, 我是按照这里推荐的一个网站查的角度，仰角调锅(33")的，然后把universal lnb顺时针调了１５度左右，然后找了几个的110的tp频率，但是质量仍然是零，又微调了锅，没有改善. 我的文件是从CaptiveWorks官方网站下载的，文件名是W600PV1.09_Reocrder_2_20_07.bin.确认串口线插的很牢.

Jul 31st, 2007, 00:00	只看该作者 #668
yunboo ▂ ▂ ▃ ▄ ▅ ▆ 注册日期: Jul 2004 住址: ROD 帖子: 3,292 积分:5 精华:5 声望: 78577954	I dont know what do you have and what settings you did in ur receiver. here is step by step loading guide, hope these can help ------------------------------------------------------------------------------- CW600s Premium S/W Upgrade Guide! Tools Need to update your receiver CW600s Premium Receiver: 1- Null Modem Cable 2- get the Newest bin in the download section of the forum. Make sure it is for Premium model. 3- Loading Software "Loader v1.05.zip"-edit abor- or use the 1.06 loader. Create a folder on you PCs desktop name "CW_Premium" using Winzip or Winrar unziping program to unzip all files to "CW_Premium" folder. 1) Connect your PC and receiver with twisted RS-232C Null modem cable. 2) Power off the receiver from the back switch. 3) You can load bin file using two methods “boot” Mod and "Standby" Mod. If you want to load the sofware using "Standby" Mod go to #4. Here how you get into “boot”MOD: Hold power button on the front of the receiver and turn the power ON from the back of the receiver. You will see a word “boot” on the front LCD screen of the receiver. 4) Turn receiver Off from the back and then ON the receiver; you will see 00:00 now press "POWER" key on front of the receiver panel to make it standby, the LED dot will display “- - : - -“. 5) Start New LoaderV1.05.exe check if the right COM port is selected then select <Download Main S/W>, press <Open> and select the bin file,“CX_Kround_600Perminum_V1.XX_date.bin" then click <Start>, upgrade will begin. 6) After finishing, the receiver LED will display "-End" If your experience any problem during the upgrade start over again. Here is a guide to Scan your Satellites Connect your sat cable to your receiver and hook up your receiver to your TV set. You can scan Single or Multiple satellites for channels at the same time. Single Satellite search can be done by going to: Main Menu -> Installation -> Antenna Setup -> Select the satellite you want to scan for channels and press “Red” key on your remote Here are typical Configuration settings for a DSS LNB Antenna Setting Satellite name 22 Echostar 6,8 (110W) Transponder 12224 / V / 20000 / 5 / 6 LNB Freq 11250 LNB Type Normal 22 KHz Off Diseqc Number LNB1 Legacy SW Off Motorized System None You can use “Legacy switch” by changing it to “SW21 Dish1” and changing Diseqc Number back to NONE. -After you have done changing the configuration according to your setup press “RED” key on you remote. It will start scanning all of the channels for that particular satellite. -You can also access Blind Scan feature from the same screen by pressing “Yellow” key from your remote. -If you want to scan only one transponder then press “Blue” key from your remote. Multiple Satellites Scan You can scan maximum 4 satellites at a same time using easy tuning feature available in New OSD Main Menu -> Installation -> Easy Tuning Here is a typical setup for multiple satellites using Easy Tuning feature: Status Satellite name Diseqc LNB Freq OnEcho 3LNB1 11250 On Echo 6,8LNB2 11250 OnEcho 7LNB3 11250 OnNimiq 1,3LNB4 11250 To go from Status to Satellite name scroll down until you see Satellite name field get highlighted then use right/Left key to change satellite you want scan; now scroll down again until you get to Diseqc switch setting change it to whatever your switch setting; scroll down to LNB Frequency setting and change it to appropriate frequency. After you have finished configuring all Satellites press OK key using right or left press “Fast Tuning” or “Auto Tuning” system will start scanning all of the satellites one by one. Enable the Patch To watch scrambled channels you must Enable the patch Exit all menus, Press F1 key; the LED will display 'H', then press '000' please stick this for me here,ty.

Jul 31st, 2007, 00:06	只看该作者 #669
yunboo ▂ ▂ ▃ ▄ ▅ ▆ 注册日期: Jul 2004 住址: ROD 帖子: 3,292 积分:5 精华:5 声望: 78577954	latest bin name for CW600SP should be "CW600PV1.41_14062007.bin" or "CW600PV1.42.bin", both are working for now.

Jul 31st, 2007, 14:22	只看该作者 #671
f2a Senior Member 注册日期: Aug 2006 帖子: 2,388 积分:21 精华:6 声望: 35530013	游戏开始了.

Jul 31st, 2007, 15:23	只看该作者 #673
豆豆2005 V V I P 注册日期: Aug 2004 帖子: 3,432 积分:26 精华:8 声望: 36952378	刚查了一下，是不是今早换K了？

Jul 31st, 2007, 17:11	只看该作者 #675
CaptiveworksNewBie Junior Member 注册日期: Jul 2007 帖子: 7 声望: 0	多谢yunboo和锅王，刚刚把最新的bin文件写到receiver里去了，不知道是更新了loader1.06的原因还是在boot状态更新的原因。

Jul 31st, 2007, 17:21	只看该作者 #676
CaptiveworksNewBie Junior Member 注册日期: Jul 2007 帖子: 7 声望: 0	还有一个问题，要收110，是不是必须要circular LNB, 我的是Fortec Universal Single LNBF. Spec as follows: Input: low: 10.7-11.70, LO 9.75, GAIN 56, v 0.7 high:11.7-12.75, LO 10.6, GAIN 56, v 0.7 多谢了