温故而知新:没锅的日子真难受，有无卫视烧友，交流一下(1)

[ym416]

作者: 移民

居然有5个星, 一锅四星, 单锅对着61.5 ? 上面还有人说30的锅, 同时收121和101不可能. 我买了两个线极化的头, 准备试试101和121在30的锅, 实现101,110,121, 然后可以省下一个24的锅. 不过得再动干戈了, 得把110做中心点.

用卡机, 换台有点累, 如果能把频道号换成频道名字, 那最好了, 象AMC4那样.

Here is a installation guide someone may interest:
Telstar 5 Installation

Thus, Where you guys bought Dishes and LNBs? How much you go for it?

[ym416]

Anyone use Ariza TP1000 satellite receiver?Give any ideas whether it could use for test. Thanks.
This one is quite cheap, but do not know whether it works fine.

XinLi has whole set for $260. 33` dish

[ym416]

作者: oree

Ariza TP1000 satellite receiver这个接收机很不错！图象质量和本机质量很可靠！
尽管放心买！但要记住它只是个FTA接收机！也就是接收95/97/101度卫星可以。

Thank you. But Boss of XinLi told me it could receive every thing, and would only tell me how after I paid for it.

[ym416]

Anyone try to catch 95, 97, 101 in one LNB?

[ym416]

Anyone pointing to 101 bird? are there any chinese channels?

[ym416]

I just bought a pansat 2500A, I wonder why it always showed me level 70+, no matter even I point dish to the ground? is something wrong?

[ym416]

作者: gsco

请问多伦多在哪里可以买到FTA接收机（Pansat, Fortec, etc.), 前面贴子有人提到xinli，是在多伦多吗？地址在哪里？

作者: BlueWhale

RTC and some other stores @ Mississage, North west coner of Mathon/Dixie

Xinli @ sheppard / midland, northeast, apposit to scarborough community center

[ym416]

作者: BlueWhale

It's normal. If you connect a LNB the signal level is alway >70%.
If you point to a bitd, it's still say >70%
Don't look at level. Only care the quality. Quality>30% then you can get channel.

Thanks BlueWhale,

I just tried to get 95W @204 (campass 215) /36 for two days, 0 quality, I am using a universal LNB and 33" dish, looks like it is not easy then to net a moon from bottom of sea. I wonder if the setting goes wrong. by the way, why the default SKEW show 45?

[ym416]

作者: BlueWhale

Some LNB can adjust the SKEW by ird. But 95% LNB doesn't have this feature.
So what ever you set the SKEW on your Pansat, it doesn't effect anything unless you have a special LNB. I never see that kind of LNB in the market. Only see it at some web. You have to adjust the SKEW by your self. And it's IMPORTANT for linear sat (95, 101, 121, 127etc).
36 dish is big enough to get 95. Check the skew and move your dish slowlly.

Thank you, I got 95 and 97 last night, so wonderful!
But I can't get both on one LNB , I moved left, got 97, lost 95, and move to right, got 95 but lost 97,
Will try it again to night.

From 95 I can only get CCTV4/9, no others, but 97 has a lot.

[ym416]

作者: FriendCalgary

CCTV4 , CCTV9 and more CHINESE channle on 121 and 127, why you point 95 & 97, any special ?

Nothing special, just thinking of add one more LNB for 91W.

[ym416]

作者: BlueWhale

I think you can use one LNB to get 119 and 121. Not for others. It's just because 119 signal is toooo strong. Even you are not point to it you still get enough signal.

From the begining of this forum, couple of people saying catching two bird(95/97) by one stone, and they did it, I tried it but failed, may switch to 119 and 121.

[ym416]

LNBF I bought from Ebay

我有这个LNBF, 但不知道这么设置。
我用他收119W(echostar 7), Pansat 2500 可以工作(不全) , 但MultiStar MAX 2500 就不工作

[ym416]

作者: yunboo

这是D!SHNET的标准LNBF, 收一个星 (D!SHNET WORK 或BELL都可以), 可以接两个RECEIVER. PANSAT2500 应100%工作, 不全是你没对准. MultiStar MAX 2500 就不工作可能是信号不够强, 你再看看参数设置.

Thanks Yunboo, I have managed to get it work by setting LNB to Normal with both LO 11250, so I use a universal LNB to point to 121/119, and this unit to 110, Now another problem came up. I used a 4 to 1 swith to connect this two LNBs to receiver, it works perfect with Multistar max 2500, but failed while connecting to Pansat. It showed one LNB with no signal, always, when I remove 110 from list, then 121 signal comes up, or only show 110 signal, not 121 and 119. Is that always with pansat receiver since the two LNB are different type?

[ym416]

作者: yunboo

i believe you should change those settings on your pansat receiver.
set "DiSEqC on, 12v-on, 22k-no" on both sat. (assue sat1-110, sat2-121(119))
set "normal/11250/11250' on sat1
set "universal /9750/10600" on sat2
for the universal lnb, LNB要转一个角度安装，这个很重要。---by Blue

Thanks Yunboo, But if I remember right, there is no 12V setting on pansat, I will try turn DiSEqc on and 22K on tonight.

[ym416]

The first time this post floated out to second page!
What happen!!!
Anyway al7bar is down today, anyone has the latest bin for pansat?

[ym416]

That's for FORTEC, how about PANSAT?

作者: 北约客

一到有大点的改变，上去的人就太多了，试一试早晨9点以前应该可以。
FORTEC现在的276bin，又有了AutoRoll。

[ym416]

Does any one know will new N2 DG700 BIN kill my maximum 2500 box?
I used to use DG7000 bin.

Thanks

[ym416]

No one using this box???

作者: ym416

Does any one know will new N2 DG700 BIN kill my maximum 2500 box?
I used to use DG7000 bin.

Thanks