音箱线的选择

千金顶 · Nov 24th, 2012, 11:08

引用:

作者: vodomore

最后还是买了这个线...14GAUGE...AudioQuest X2

这线不错，俺的音箱喇叭线就用的它。单晶铜，注意有方向

千金顶 · Nov 24th, 2012, 16:23

[QUOTE=hugoo;4770686]信号线有方向是因为屏蔽一端接地，音箱线有方向是个什么说道?

Does direction matter? Does breaking in matter? We've had a few fights over the years about that!

The answer for direction is "If you can hear it - yes. If you can't - no." But it's not critical... I think...

The answer for breaking in is "If you can hear it - yes. If you can't - no." But I always say to not make any final judgments until after a few days of where there is a signal going through the wires. You don't have to be present when you're "burning in" a wire. That way any changes will be very noticeable.

And now we'll hear from the Yea sayers and Nay sayers.

http://www.nhthifi.com/Accessories-A...est-Rocket44_2
Specifications

The Audioquest Rocket 88 terminated speaker wire represents the BEST choice in NHT's good/better/best product mix.

This Double-Star Quad cable does not look normal on the outside, and it is not at all normal on the inside. Amazingly clean and effortless performance is made possible by a sophisticated combination of extraordinary materials and extremely refined design.

Conductors: All eight of Rocket 88’s conductors are solid. Solid conductors prevent strand interaction, a major source of cable distortion. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Rocket 88’s very clear sound. Whether a conductor is solid or stranded, skin effect is a prime distortion mechanism in speaker cables. Rocket 88 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.

Metal: Extreme high-purity Perfect-Surface Copper+ (PSC+) minimizes distortion caused by grain boundaries that exist within any metal conductor, eliminating harshness and greatly increasing clarity compared to all other conducting materials. PSS has an astonishingly smooth and pure surface. Proprietary metal processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes the wonderfully low distortion PSC conductor used in many AudioQuest models. PSC+’s extreme transparency is made possible by applying Perfect Surface Technology to ultra pure solid copper. PSC+ is the ultimate example of how far this remarkable technology can take us.

SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in Rocket 88 allow an exceptionally clear, clean and dynamic sound.

Dielectric Bias System (DBS) (US patent 7,126,055): Greatly improved performance is made possible by a constant 48 volt charge on all Rocket 88’s insulation.
Similar to how the earth’s magnetic field makes all compasses point north, the AQ DBS system creates an electrostatic field which causes the molecules of the insulation to all point in the same direction. This minimizes the multiple nonlinear time-delays. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. Because DBS battery packs are attached when Rocket 88 cables are assembled, Rocket 88 does not require any additional run-in period. Because there is no “load” on the easily replaceable batteries, they will last for years. A test button and LED allow for occasional verification of battery performance.

Double Star-Quad Geometry: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 88 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 4-cross geometry used in each half of Rocket 88 maximizes this advantage. In addition, Rocket 88 is an exceptional Single-BiWire cable. When the halves are separated at the speaker end, the Double Star-Quad design turns Rocket 88 into a true Double-BiWire set thanks to the magnetic autonomy of each star-quad. When separated the Dual Star-Quads let Rocket 88 be a maximum performance Double-BiWire in a single cable.

Cold-Weld Terminations: Superior AudioQuest connectors allow Rocket 88 to be securely attached to any type of equipment. AQ ends are dull looking because there is no harsh sounding shiny nickel layer underneath the silver (or gold). The connection between the plug and conductors is made using AQ's Cold-Weld system which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact. The Cold-Weld system refers to a combination of high pressure at the point of contact and the use of copper or silver impregnated paste. (Rocket 88’s silver conductors get silver paste.) A controlled amount of pressure is used to essentially make the conductor and connector mechanically "as one" without the use of heat. The silver bearing paste acts as both a silver sulfide retardant, and as well as a very effective contact enhancer. AQ's Cold-Weld system ensures a practically perfect connection

Application: The PVC “pants” on either end of Rocket 44 are marked “Speaker End” or “Amp End”. Please use cables in the direction required.These speaker wires are terminated with Audioquest's silver BFA connectors and are available in either full-range (FR) termination (1 +, 1- on each end) or as single bi-wire (SBW) pairs (1 +/- on amp end and 2 +/- on speaker end).
Brochure

Owners Manual

Audioquest Cable Theory

Online Reviews

Nov 24th, 2012, 16:23	#2
千金顶 Senior Member 注册日期: Jul 2004 帖子: 2,727 积分:29 精华:10 声望: 4236622	[QUOTE=hugoo;4770686]信号线有方向是因为屏蔽一端接地，音箱线有方向是个什么说道? Does direction matter? Does breaking in matter? We've had a few fights over the years about that! The answer for direction is "If you can hear it - yes. If you can't - no." But it's not critical... I think... The answer for breaking in is "If you can hear it - yes. If you can't - no." But I always say to not make any final judgments until after a few days of where there is a signal going through the wires. You don't have to be present when you're "burning in" a wire. That way any changes will be very noticeable. And now we'll hear from the Yea sayers and Nay sayers. http://www.nhthifi.com/Accessories-A...est-Rocket44_2 Specifications The Audioquest Rocket 88 terminated speaker wire represents the BEST choice in NHT's good/better/best product mix. This Double-Star Quad cable does not look normal on the outside, and it is not at all normal on the inside. Amazingly clean and effortless performance is made possible by a sophisticated combination of extraordinary materials and extremely refined design. Conductors: All eight of Rocket 88’s conductors are solid. Solid conductors prevent strand interaction, a major source of cable distortion. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Rocket 88’s very clear sound. Whether a conductor is solid or stranded, skin effect is a prime distortion mechanism in speaker cables. Rocket 88 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion. Metal: Extreme high-purity Perfect-Surface Copper+ (PSC+) minimizes distortion caused by grain boundaries that exist within any metal conductor, eliminating harshness and greatly increasing clarity compared to all other conducting materials. PSS has an astonishingly smooth and pure surface. Proprietary metal processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes the wonderfully low distortion PSC conductor used in many AudioQuest models. PSC+’s extreme transparency is made possible by applying Perfect Surface Technology to ultra pure solid copper. PSC+ is the ultimate example of how far this remarkable technology can take us. SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in Rocket 88 allow an exceptionally clear, clean and dynamic sound. Dielectric Bias System (DBS) (US patent 7,126,055): Greatly improved performance is made possible by a constant 48 volt charge on all Rocket 88’s insulation. Similar to how the earth’s magnetic field makes all compasses point north, the AQ DBS system creates an electrostatic field which causes the molecules of the insulation to all point in the same direction. This minimizes the multiple nonlinear time-delays. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. Because DBS battery packs are attached when Rocket 88 cables are assembled, Rocket 88 does not require any additional run-in period. Because there is no “load” on the easily replaceable batteries, they will last for years. A test button and LED allow for occasional verification of battery performance. Double Star-Quad Geometry: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 88 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 4-cross geometry used in each half of Rocket 88 maximizes this advantage. In addition, Rocket 88 is an exceptional Single-BiWire cable. When the halves are separated at the speaker end, the Double Star-Quad design turns Rocket 88 into a true Double-BiWire set thanks to the magnetic autonomy of each star-quad. When separated the Dual Star-Quads let Rocket 88 be a maximum performance Double-BiWire in a single cable. Cold-Weld Terminations: Superior AudioQuest connectors allow Rocket 88 to be securely attached to any type of equipment. AQ ends are dull looking because there is no harsh sounding shiny nickel layer underneath the silver (or gold). The connection between the plug and conductors is made using AQ's Cold-Weld system which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact. The Cold-Weld system refers to a combination of high pressure at the point of contact and the use of copper or silver impregnated paste. (Rocket 88’s silver conductors get silver paste.) A controlled amount of pressure is used to essentially make the conductor and connector mechanically "as one" without the use of heat. The silver bearing paste acts as both a silver sulfide retardant, and as well as a very effective contact enhancer. AQ's Cold-Weld system ensures a practically perfect connection Application: The PVC “pants” on either end of Rocket 44 are marked “Speaker End” or “Amp End”. Please use cables in the direction required.These speaker wires are terminated with Audioquest's silver BFA connectors and are available in either full-range (FR) termination (1 +, 1- on each end) or as single bi-wire (SBW) pairs (1 +/- on amp end and 2 +/- on speaker end). Brochure Owners Manual Audioquest Cable Theory Online Reviews