请看看这个方子看怎样才能省钱?先谢谢了！

little_bear · Jan 30th, 2006, 22:39

基本情况：９７camry v6 191k km 行驶过程偏右．　前几天去ＣＡＮＡＤＩＡＮ　ＴＩＲＥ换油检查发现四个轮胎内侧有磨损，目测轮胎齿纹基本还有，胎中纹还非常好．今天去ＴＯＹＯＴＡ　ＤＥＡＬＥＲ检查，开出方子如下：
1,FRONT BRAKES 5MM/REAR BRAKES7MM REMAINING
2,REC MACHINE FRONT ROTOS-HEAVY RUST ON INNER FRICTION SURFACE CAD75
3,REC SERVICE FRONT BRAKES-CUSTOMER SHOULD CONSIDER REPLACEMENT CAD 54
4,REC MACHINE REAR DISK BRAKES -LARGE RUST RIDGES.CAD75
5,REC SERVICE REAR DISK BRAKES-PADS VERY TIGHT. CAD94
6REC REPLACE REAR SWAY BAR BUSHING-VERY WORN,CLUNKING OVER BUMPS.CAD130
7,REC REPLACE ALL TIRES-BADLY CRACKED AND OUT OF ROUND.CAD 648
8,REC ALIGNMENT-ANＧLES OUT OF SPE (REQ'S TIRES FIRST)CAD90
9,REC L/F CLEARANCE LENS-LEAKING AND WATER COLLECTING INSIDE-66
TOTAL COST(INCLUDED TAX): CAD1415
谢谢！祝大家发财，开新车，省烦恼．

Jan 30th, 2006, 22:39	#1
little_bear Junior Member 注册日期: Jan 2006 帖子: 1	请看看这个方子看怎样才能省钱?先谢谢了！基本情况：９７camry v6 191k km 行驶过程偏右．　前几天去ＣＡＮＡＤＩＡＮ　ＴＩＲＥ换油检查发现四个轮胎内侧有磨损，目测轮胎齿纹基本还有，胎中纹还非常好．今天去ＴＯＹＯＴＡ　ＤＥＡＬＥＲ检查，开出方子如下： 1,FRONT BRAKES 5MM/REAR BRAKES7MM REMAINING 2,REC MACHINE FRONT ROTOS-HEAVY RUST ON INNER FRICTION SURFACE CAD75 3,REC SERVICE FRONT BRAKES-CUSTOMER SHOULD CONSIDER REPLACEMENT CAD 54 4,REC MACHINE REAR DISK BRAKES -LARGE RUST RIDGES.CAD75 5,REC SERVICE REAR DISK BRAKES-PADS VERY TIGHT. CAD94 6REC REPLACE REAR SWAY BAR BUSHING-VERY WORN,CLUNKING OVER BUMPS.CAD130 7,REC REPLACE ALL TIRES-BADLY CRACKED AND OUT OF ROUND.CAD 648 8,REC ALIGNMENT-ANＧLES OUT OF SPE (REQ'S TIRES FIRST)CAD90 9,REC L/F CLEARANCE LENS-LEAKING AND WATER COLLECTING INSIDE-66 TOTAL COST(INCLUDED TAX): CAD1415 谢谢！祝大家发财，开新车，省烦恼．
little_bear Junior Member 注册日期: Jan 2006 帖子: 1