Sep 11th, 2012, 21:49 | #1 |
Senior Member
注册日期: Apr 2007
帖子: 281
|
请教电视天线问题
在Wal-Mart买了Philips SDV1125T/27电视天线,$25, 带个同轴电缆,不带电源,直接连到电视后面的Cable端口,家里电视是LCD TV, 没有信号, 是否需要其它转接件? 说明书如下: For TVs with 75 ohm connection: Attach cable from antenna directly to TV For this antenna to work properly, you must access the menu on the television you are connecting this antenna to (consult your television owner’s manual) then set it to receive the signal from an ANTENNA instead of CABLE or SATELLITE. Notes: With screw connections a band separator (not included) is required to access UHF reception. 请指教,是因连接不对还是天线不好用?谢谢! |
|
Sep 15th, 2012, 21:13 | 只看该作者 #13 |
软件基本靠载 硬件基本靠拆
注册日期: Jul 2004
住址: GTA
帖子: 13,253
积分:52
精华:18
声望: 3174223
|
有ATSC的,可以收。 http://www.docs.sony.com/release/KDL22EX308_qs.pdf 看12页:Running initial setup部分. 1 Complete your cable connections before proceeding with the Initial Setup. Connect the TV to your nearest power outlet. 2 For HX701 series models, check the ENERGY SAVING SWITCH setting is on (z). 3 Press POWER on the TV. When you switch the TV on for the first time, the Language menu appears on the screen. 4 Follow the instructions on the screen. ~ • The ENERGY SAVING SWITCH must be on (z) to set the clock and obtain program information for the TV Guide. • Home mode sets the TV to display the settings optimized for home viewing (this setting is ENERGY STAR compliant). 5 Select Continue to scan for available channels and enable the TV Guide On Screen® feature. If you receive channels from a cable box or satellite receiver and do not wish to use the TV’s built-in tuner, select Skip. Selecting Skip will disable the TV Guide On Screen feature, which is only available when the TV’s tuner is used. ~ • If you skip the channel scan while in the setup menus, TV Guide will be disabled. Detaching the Table-Top Stand from the TV Remove only the screws marked with on the TV. ~ |
|