MIO C520上安装IGO,Garmin,TomTom - 第13页

可怜啊 · Apr 11th, 2009, 01:34

引用:

作者: hiker007

2009年第一贴,首先祝各位新年快乐!前天拿到boxing day买的Mio C520 (http://www.futureshop.ca/catalog/pro...13&catid=25833). 开...

http://www.mio.com/ca/en/16125.htm
上面的这个能破解吗？

风雪 · Apr 11th, 2009, 08:35

引用:

作者: 可怜啊

http://www.mio.com/ca/en/16125.htm
上面的这个能破解吗？

300c没问题，和帖子一样做。

秋天的叶子 · Apr 14th, 2009, 20:17

引用:

作者: 白沙

1.unzip and copy attached file to your SD card
2.run sunglobepatch.cab
3.copy sunglbe.ttf to the folder: my device\windows
4.Now you can use Haalir...

字体文件太大, 无法拷贝到 my device\windows?

白沙 · Apr 17th, 2009, 17:43

Go to setting/control panel/system/memory,
move the slide to the right a little bit.
then you can copy it.

BBface · Apr 17th, 2009, 17:50

那里可以买MIO C520 GPS ?

秋天的叶子 · Apr 17th, 2009, 18:48

引用:

作者: 白沙

Go to setting/control panel/system/memory,
move the slide to the right a little bit.
then you can copy it.

谢谢, 再试试看,是放在WINDOWS下,还是FONTS下?
装了几次都没装上mdict, 总提示错, 能给个详细的步骤吗?

秋天的叶子 · Apr 17th, 2009, 19:15

引用:

作者: 白沙

Go to setting/control panel/system/memory,
move the slide to the right a little bit.
then you can copy it.

文件拷完了,可是好像汉字不能显示,还是方块

mtlhrvm · Apr 17th, 2009, 21:31

引用:

作者: 白沙

Go to setting/control panel/system/memory,
move the slide to the right a little bit.
then you can copy it.

I Increased memory, copied file. I can read chinese. but after turning off, then turn on, the memory return to original small one.

How can I keep this setting. My GPS is Curtis GPD359.

Thanks,

allan · Apr 18th, 2009, 15:33

In my understanding, the Chinese module resides in the memory when you install it with the .cab file. So after you turn off the PDA, everything in the memory is lost. You have to re-install it if needed.

Maybe you can add some script to the startup script file so that it will be installed automatically when the PDA is turned on.

引用:

作者: mtlhrvm

I Increased memory, copied file. I can read chinese. but after turning off, then turn on, the memory return to original small one.

How can I keep t...

mtlhrvm · Apr 18th, 2009, 21:38

引用:

作者: allan

In my understanding, the Chinese module resides in the memory when you install it with the .cab file. So after you turn off the PDA, everything in the...

Since the Sunglobe.ttf is 3.06Mb, it has to be put under Window. I use MioPocket to adjust internal memory. After changing, everything is ok. I can read Chinese on Mdict, kinsoft dict. Route66...

If I keep GPS on, or let it sleep, or suspend it, no problem. The internal memory space will not change. The Sunglobe.ttf font file keeps there. But if I turn off GPS, or hard reset, the internal memory restore to original state. The font file gone. I have to recopy and it works again.

Any idea how to keep the setting and file?

Thanks,

allan · Apr 18th, 2009, 22:39

This requires a good understanding of your unlock and some script programming.

Usually the unlock allocates minimum space (memory) for storage to keep maximum space for applications. So you need to re-set the storage memory (in the case of MioPocket, it is in the file "MioAutoRun\Scripts\Unlock.mscr").

Save the font file "sunglobe.ttf" to "SD Card\MioAutoRun\Windows\Windows" folder. It will be copied to "my device\windows" folder upon reboot.

Save the file "sunglobePatch.cab" to "SD Card\MioAutoRun\Windows\StartUp" folder. It will be executed upon reboot. In my Mio C520, I got error message of OS version mismatch, but I can still install it.

引用:

作者: mtlhrvm

Since the Sunglobe.ttf is 3.06Mb, it has to be put under Window. I use MioPocket to adjust internal memory. After changing, everything is ok. I can r...

mtlhrvm · Apr 19th, 2009, 19:17

引用:

作者: allan

This requires a good understanding of your unlock and some script programming.

Usually the unlock allocates minimum space (memory) for storage to ...

Hi Allan,
Thank you very much!
Do I still need to edit "Unlock.mscr"? How to re-set the storage memory?
Thanks,

allan · Apr 19th, 2009, 21:32

Open Unlock.mscr with Notepad, find the paragraph containing "SetSystemMemoryDivisionKB". It should be around Line 32 and look like:

If(FreeDiskSpace("\", KB) < roomNeeded)
RunWait(ProgramsFolder\"TroNik\SetSystemMemoryDivisionKB.exe", TotalDiskSpace("\", KB) + roomNeeded - FreeDiskSpace("\", KB))
EndIf

This code dynamically allocates the storage space, though I don't quite understand how. You can check your current storage space using the resource tool, and add 4MB for the font file. Comment out the above code and add one line code, as follows:

#If(FreeDiskSpace("\", KB) < roomNeeded)
# RunWait(ProgramsFolder\"TroNik\SetSystemMemoryDivisionKB.exe", TotalDiskSpace("\", KB) + roomNeeded - FreeDiskSpace("\", KB))
#EndIf
RunWait(ProgramsFolder\"TroNik\SetSystemMemoryDivisionKB.exe", 5120)

Here I set the storage space to a static 5MB (5120KB). Of course, setting the storage space to a static number could cause some potential issues.

引用:

作者: mtlhrvm

Do I still need to edit "Unlock.mscr"? How to re-set the storage memory?
Thanks,

mtlhrvm · Apr 20th, 2009, 21:02

引用:

作者: allan

Open Unlock.mscr with Notepad, find the paragraph containing "SetSystemMemoryDivisionKB". It should be around Line 32 and look like:

If(FreeDiskSpa...

Hello Allan,
I am a complete novice on WinCe and MioPocket. I tried to edit "unlock.mscr" setting static memory to 5120 or increasing "roomneeded". I also tried to run "unlock.mscr". It displayed some message like in the file of "unlock" and re-started automatically but nothing changed afterward.

Thanks a lot,

allan · Apr 20th, 2009, 22:28

OK, keep a copy of your original unlock.mscr as a backup, delete the following 3 lines:

If(FreeDiskSpace("\", KB) < roomNeeded)
RunWait(ProgramsFolder\"TroNik\SetSystemMemoryDivisionKB.exe", TotalDiskSpace("\", KB) + roomNeeded - FreeDiskSpace("\", KB))
EndIf

In its place, add the following line:

RunWait(ProgramsFolder\"TroNik\SetSystemMemoryDivisionKB.exe", 5120)

引用:

作者: mtlhrvm

Hello Allan,
I am a complete novice on WinCe and MioPocket. I tried to edit "unlock.mscr" setting static memory to 5120 or increasing "roomneeded". I...

mtlhrvm · Apr 21st, 2009, 18:53

引用:

作者: allan

OK, keep a copy of your original unlock.mscr as a backup, delete the following 3 lines:

If(FreeDiskSpace("\", KB) < roomNeeded)
RunWait(ProgramsF...

Maybe it is a problem of my device. MioPocket is not full compatible with it.
I also tried to reinstall MioPocket. It is same result.

I found a new version of Mdict 3.0. It can display Chinese. It has a UniSun font inside. I removed the Mdict 2.5 version and kingsoft dictionary.The Route66 can display Chinese maps also, I don't need to install SunGlobe font anymore.

Thanks for all the info and these great thread.
Thank you very much, Allan.

红枫叶 · Apr 21st, 2009, 19:02

恩。不错。

引用:

作者: hiker007

2009年第一贴,首先祝各位新年快乐!前天拿到boxing day买的Mio C520 ("http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000FS10090113&catid=2583...

秋天的叶子 · Apr 22nd, 2009, 09:00

引用:

作者: mtlhrvm

Maybe it is a problem of my device. MioPocket is not full compatible with it.
I also tried to reinstall MioPocket. It is same result.

I found a ...

能给个链接吗? MDICT3.0? 我下了一个可装不上,谢谢

mtlhrvm · Apr 22nd, 2009, 12:15

引用:

作者: 秋天的叶子

能给个链接吗? MDICT3.0? 我下了一个可装不上,谢谢

http://www.octopus-studio.com/download.cn.htm

http://pdawiki.5d6d.com/

allan · Apr 22nd, 2009, 19:37

I use CE-Star. I manually install it only when needed, since I want to save maximum memory for applications.

And thank you for other info.

引用:

作者: mtlhrvm

Maybe it is a problem of my device. MioPocket is not full compatible with it.

Apr 17th, 2009, 17:43	只看该作者 #244
白沙 Member 注册日期: Jul 2004 帖子: 78 声望: 0	Go to setting/control panel/system/memory, move the slide to the right a little bit. then you can copy it.
白沙 Member 注册日期: Jul 2004 帖子: 78 声望: 0

Apr 17th, 2009, 17:50	只看该作者 #245
BBface Member 注册日期: Mar 2009 帖子: 73 积分:3 精华:1 声望: 1	那里可以买MIO C520 GPS ? 那里可以买MIO C520 GPS ?
BBface Member 注册日期: Mar 2009 帖子: 73 积分:3 精华:1 声望: 1