温故而知新:没锅的日子真难受，有无卫视烧友，交流一下(10) - 第5页

tomgod · Jan 4th, 2008, 21:29

引用:

作者: zsnow

大家有没有看82的阿，昨天晚上终于都调出来，Dvddream+emu 3.0.0.9 , 结果看几分钟就黑屏！关掉再开有的时候又有了，但是过一会儿又都没有了。信号Q40-60左右

你的Q具体多少？如果是在跳动，可能有问题。
我收看82的，没有问题，只是换台要等上10秒左右重新跟踪

tomgod · Jan 4th, 2008, 21:40

大家最近看91上的discovery频道有没有发现什么问题？
我这个频道的Q只有38%了，现在一顿一顿的，其他频道没这问题。

ahchu · Jan 4th, 2008, 21:44

CW800S 1.43 出来了!! work ok! Thanks to the coder!!!

阿华 · Jan 4th, 2008, 22:00

引用:

作者: tomgod

还有个DLL文件，pthreadVC2.dll，有没有拷贝到dvbdream的主目录下？？？

兄弟，好人啊，终于有啦，多谢！

还有一个问题，我是用一个LNB同时看119+118.7, 在DVBDream 里面该怎么设置？把这两颗星放同一个port下，然后分别scan ?

http://www.chinasmile.net/gallery/albums/userpics/19282/118%7E0.JPG

jpyle · Jan 4th, 2008, 22:13

[SIZE="3"][SIZE="4"]求助
30寸的锅+Digiway standard kU LNBF DG780 经改良后的LNB能收118.7的星吗?
RF:11.70/12.20GHz,
IF:950/1450MHz,
LO:10.752GHz,
Gain:55dB,
Noise Figure:0.5dB
S/N:2502001

无言感激![/SIZE][/SIZE]

tomgod · Jan 4th, 2008, 22:50

引用:

作者: 阿华

兄弟，好人啊，终于有啦，多谢！

还有一个问题，我是用一个LNB同时看119+118.7, 在DVBDream 里面该怎么设置？把这两颗星放同一个port下，然后分别scan ?

http://www.chinasmile.net/gallery/albums/userpics...

呵呵，随便哪个都可以，记得选上“网络扫描”就可以了

zsnow · Jan 5th, 2008, 00:26

引用:

作者: tomgod

你的Q具体多少？如果是在跳动，可能有问题。
我收看82的，没有问题，只是换台要等上10秒左右重新跟踪

我觉得应该跟Q没关系，我看那个免费的HD台一点问题都没有，还是解密问题。
你用的emunation版本多少？除了直接解压到Plugins目录和根目录外还有没有别的特殊设置？另外你用的软件是什么？

FireROR · Jan 5th, 2008, 00:44

引用:

作者: zsnow

我再换别的软件试试，altdvb我觉得是最好的，可惜不能看高清

altdvb俺用了出错....

mytheatre切换速度慢,扫台快,但是扫不全

现在在试dvbdream,好像不错....不知道怎么搞字母出来...有人知道么?

tomgod · Jan 5th, 2008, 01:06

引用:

作者: zsnow

我觉得应该跟Q没关系，我看那个免费的HD台一点问题都没有，还是解密问题。
你用的emunation版本多少？除了直接解压到Plugins目录和根目录外还有没有别的特殊设置？另外你用的软件是什么？

同上
还有个DLL文件，pthreadVC2.dll，有没有拷贝到dvbdream的主目录下？？？
我用3.0.0.9的

Century · Jan 5th, 2008, 01:19

感谢misc123, 根据你提供的线索, 已经弄好了!

引用:
作者: Century
紧急求救: 刚在TOTALFTA上下了VS ULTRA 文件, 装的时候在显示"DO NOT POWER OFF" 时断电了, 现在机器启不起来了, 怎么办?

Try this:

Viewsat Ultra FAIL Fix
VS Ultra FAIL FIX.zip
--------------------------------------------------------------------------------
This is a repair program only! It is a tool used to repair 'dead' Viewsat Ultra boxes. It is not intended to make receivers decrypt anything!

Your Ultra will need the latest fix after it has been restored!

Works on GENUINE ver 1 & 2 VS Ultras

Will repair what appears to be an unrepairable 'dead' box...

- Unit will not respond to your remote
- Accidentally loaded the wrong bin
- USB not recognized
- the old favorites '----' and 'fail'
- Unlocks hopelessly locked units (codes -0000, 0937, 3570)
- Works on GENUINE VSUs
** This tool has not been tested on clones, so, I don't know if it'll work...
The list goes on...

Needed...

Loader2, the PVRloader is just as good
A NULL cable
Install 'mainpg.pgm' via your serial port, your presumed dead unit is now behaving as new!
Now get the latest fix and install via your thumb drive.
You DO NOT have to install a factory file.

--------------------------------------------------
Edit: Add link
Go to here for details and files (free registration):
http://www.livefta.com/forums/viewsa...-fail-fix.html

Century · Jan 5th, 2008, 01:28

DN and BV both work fine, only it's slow when changing channels.

misc123 · Jan 5th, 2008, 02:56

CW fix 又出来了
Fixed Freeze on DN / Bev / manual key entry for GC

lake_ontario2000 · Jan 5th, 2008, 04:24

received signal on 91W(Q-75, S-80), and also got 406 channels by auto search, the
problem: can not see the program/pictures. Any Clue?

Loaded with CW700SV1.44_2008_01_04.

My box is Captive Works 700S.

Thanks

I think it is nimiq1 . I can not see the program.

lake_ontario2000 · Jan 5th, 2008, 09:00

Help. Please.

oasis · Jan 5th, 2008, 10:43

引用:

作者: lake_ontario2000

received signal on 91W(Q-75, S-80), and also got 406 channels by auto search, the
problem: can not see the program/pictures. Any Clue?

Loaded with ...

F1 0 0 0

阿华 · Jan 5th, 2008, 12:55

请问怎样在 DvbDream 里设置LNB power off 呢？主要是因为， DVB-S 卡的输入口接的是Receiver的loopout 。

多谢！

daweiz · Jan 5th, 2008, 13:45

引用:

作者: 豆豆2005

view xtreme 也一样 only for dn
file is called DBPSW-080104X

view xtreme 现在有新的BIN了吗？可看b3v？

tomgod · Jan 5th, 2008, 13:47

引用:

作者: 阿华

请问怎样在 DvbDream 里设置LNB power off 呢？主要是因为， DVB-S 卡的输入口接的是Receiver的loopout 。

多谢！

无此选项（1.3C版本的）
估计是自动的吧

vert · Jan 5th, 2008, 15:04

引用:

作者: daweiz

view xtreme 现在有新的BIN了吗？可看b3v？

Yes, Dbpsw-080105x

杜小月 · Jan 5th, 2008, 15:18

谢谢！为啥开了电源只有面板的红灯亮？难道买了个坏的？

Jan 4th, 2008, 21:44	只看该作者 #83
ahchu Member 注册日期: Oct 2007 帖子: 81 声望: 638870	CW800S 1.43 Ha Ha Ha !!! CW800S 1.43 出来了!! work ok! Thanks to the coder!!!
ahchu Member 注册日期: Oct 2007 帖子: 81 声望: 638870	氧化星

Jan 4th, 2008, 22:13	只看该作者 #85
jpyle Junior Member 注册日期: Dec 2006 帖子: 9 声望: 0	求助 [SIZE="3"][SIZE="4"]求助 30寸的锅+Digiway standard kU LNBF DG780 经改良后的LNB能收118.7的星吗? RF:11.70/12.20GHz, IF:950/1450MHz, LO:10.752GHz, Gain:55dB, Noise Figure:0.5dB S/N:2502001 无言感激![/SIZE][/SIZE]
jpyle Junior Member 注册日期: Dec 2006 帖子: 9 声望: 0

Jan 5th, 2008, 02:56	只看该作者 #92
misc123 Senior Member 注册日期: Dec 2007 帖子: 119 声望: 0	CW fix 又出来了 Fixed Freeze on DN / Bev / manual key entry for GC
misc123 Senior Member 注册日期: Dec 2007 帖子: 119 声望: 0

Jan 5th, 2008, 04:24	只看该作者 #93
lake_ontario2000 Member 注册日期: Sep 2005 帖子: 38 声望: 10	received signal on 91W(Q-75, S-80), and also got 406 channels by auto search, the problem: can not see the program/pictures. Any Clue? Loaded with CW700SV1.44_2008_01_04. My box is Captive Works 700S. Thanks I think it is nimiq1 . I can not see the program.
lake_ontario2000 Member 注册日期: Sep 2005 帖子: 38 声望: 10

Jan 5th, 2008, 09:00	只看该作者 #94
lake_ontario2000 Member 注册日期: Sep 2005 帖子: 38 声望: 10	Help. Please.
lake_ontario2000 Member 注册日期: Sep 2005 帖子: 38 声望: 10

Jan 4th, 2008, 21:40	只看该作者 #82
tomgod Senior Member 注册日期: Jan 2007 帖子: 2,919 积分:6 精华:2 声望: 404694	大家最近看91上的discovery频道有没有发现什么问题？我这个频道的Q只有38%了，现在一顿一顿的，其他频道没这问题。

Jan 5th, 2008, 01:19	只看该作者 #90
Century 思想者注册日期: Jul 2004 住址: Richmond, BC 帖子: 156 声望: 0	感谢misc123, 根据你提供的线索, 已经弄好了! 引用: 作者: Century 紧急求救: 刚在TOTALFTA上下了VS ULTRA 文件, 装的时候在显示"DO NOT POWER OFF" 时断电了, 现在机器启不起来了, 怎么办? Try this: Viewsat Ultra FAIL Fix VS Ultra FAIL FIX.zip -------------------------------------------------------------------------------- This is a repair program only! It is a tool used to repair 'dead' Viewsat Ultra boxes. It is not intended to make receivers decrypt anything! Your Ultra will need the latest fix after it has been restored! Works on GENUINE ver 1 & 2 VS Ultras Will repair what appears to be an unrepairable 'dead' box... - Unit will not respond to your remote - Accidentally loaded the wrong bin - USB not recognized - the old favorites '----' and 'fail' - Unlocks hopelessly locked units (codes -0000, 0937, 3570) - Works on GENUINE VSUs ** This tool has not been tested on clones, so, I don't know if it'll work... The list goes on... Needed... Loader2, the PVRloader is just as good A NULL cable Install 'mainpg.pgm' via your serial port, your presumed dead unit is now behaving as new! Now get the latest fix and install via your thumb drive. You DO NOT have to install a factory file. -------------------------------------------------- Edit: Add link Go to here for details and files (free registration): http://www.livefta.com/forums/viewsa...-fail-fix.html

Jan 5th, 2008, 01:28	只看该作者 #91
Century 思想者注册日期: Jul 2004 住址: Richmond, BC 帖子: 156 声望: 0	DN and BV both work fine, only it's slow when changing channels.

Jan 5th, 2008, 12:55	只看该作者 #96
阿华淡水观赏鱼注册日期: Jul 2004 住址: Mississauga 帖子: 477 积分:1 精华:1 声望: 3362	请问怎样在 DvbDream 里设置LNB power off 呢？主要是因为， DVB-S 卡的输入口接的是Receiver的loopout 。多谢！

Jan 5th, 2008, 15:18	只看该作者 #100
杜小月 Senior Member 注册日期: Jul 2004 帖子: 386 声望: 906935	刚买了刚买了CW700S，哪里有loader和BIN？谢谢！为啥开了电源只有面板的红灯亮？难道买了个坏的？
杜小月 Senior Member 注册日期: Jul 2004 帖子: 386 声望: 906935