装修【求助】请问怎么用circular saw将木地板切窄？ - 第2页

dragon8540 · Apr 10th, 2011, 00:07

引用:

作者: Job

您真是热心人，非常感谢。已PM我的位置。

距我家是稍微远了点, 不过你若愿意或没有更好的办法也可考虑一下. 已PM给你我的位置. 你考虑好了后给我回句话吧.

biosfix · Apr 16th, 2011, 20:16

引用:

作者: between my legs

看照片象是复合地板。铺得还不错，特别是颜色的深浅搭配

颜色搭配不算工夫，只有一种搭配方法。想错了都不行。

Job · May 15th, 2011, 12:18

感谢以上各位大侠的热心帮助，我在网上找到一个方法，效果不错也安全，在此和各位共享一下：

The first thing you want to do is to make a jig. To do this take a piece of 3/4" plywood about 12" wide and as long as needed. Then take a 1"x6" and screw to plywood screw each end and one in the middle. Now take your plank and put double stick carpet tape in 4 places cross the board now stick to plywood against the 1"x6" fence on the jig this will hold while cutting set you rip guide on your saw and set depth of cut just below the plank and rip in. then remove from jig and remove carpet tape. You can get carpet tape at any big box store in your area.

做这个辅助工具的成本大约是20刀不到（plywood都是4x8的用不了那么大，可用平木板代替，homedepot有很多种）

May 15th, 2011, 12:18	只看该作者 #23
Job Junior Member 注册日期: Jul 2004 帖子: 29 声望: 0	感谢以上各位大侠的热心帮助，我在网上找到一个方法，效果不错也安全，在此和各位共享一下： The first thing you want to do is to make a jig. To do this take a piece of 3/4" plywood about 12" wide and as long as needed. Then take a 1"x6" and screw to plywood screw each end and one in the middle. Now take your plank and put double stick carpet tape in 4 places cross the board now stick to plywood against the 1"x6" fence on the jig this will hold while cutting set you rip guide on your saw and set depth of cut just below the plank and rip in. then remove from jig and remove carpet tape. You can get carpet tape at any big box store in your area. 做这个辅助工具的成本大约是20刀不到（plywood都是4x8的用不了那么大，可用平木板代替，homedepot有很多种）
Job Junior Member 注册日期: Jul 2004 帖子: 29 声望: 0