Nov 8th, 2008, 10:42 | #1 |
Senior Member
注册日期: Dec 2006
帖子: 422
积分:1
精华:1
|
大胆修炉头,并请教
炉 死马当活马医。见招拆招,破腹解肚挖肠,居然成功地把连接头拖到外面来了...发现一侧的接触铜片已经破缺不全。因为 HomeDepot 卖炉灶,就先去瞧瞧那里有没有这样配件,以前好像一点没有印象。万一没有,还能去别的啥地方吗? |
想有个高利率Saving Account,请加入 ING Direct ---
Referal Number17034186S1 (注意numer的倒数第二位置上是S不是5) |
|
|
Nov 10th, 2008, 23:14 | 只看该作者 #9 |
Member
注册日期: Dec 2004
帖子: 32
声望: 10
|
I meant the stove heating element (coil) terminals, rather than cable assembly. The reason your old brass contact was burn is that there was a bad connection between terminal and contact. Check your element terminals, and note the difference on the surface. One is rougher (burn) than the other, it will damage your new contact sooner.
|
|