Jul 30th, 2008, 19:23 | #1 |
Member
注册日期: Nov 2007
帖子: 36
|
【注意】南瓜3号密码系统即将更新,请大家做好准备
BELL和DISHNETWORK将在最近两个月更换已被破解的南瓜2号密码系统 其中BELL的新卡更换已经开始2个月左右,正版用户将会收到新卡的更换通知和新卡 南瓜3号密码系统已在欧洲使用近6个月左右仍然没有破解 请没有正版的网友做好BACKUP, 南瓜3号系统更换后,大部分的锅友的的接收器将无法使用,4-6个月左右或者更长的时间 上一次南瓜2号破解的时间是5个月 请即将购买入市的锅友慎重考虑等待观望 |
|
Jul 31st, 2008, 11:02 | 只看该作者 #19 |
V V I P
注册日期: Aug 2004
帖子: 3,432
积分:26
精华:8
声望: 36952378
|
C/P Confirmed on all 61.5, 110, 118, 119, 148 They will announce in May 17th 2008 Bell is ready for a card swap // 2008-02-26 From EKB: ExpressVu implementing new anti-piracy measures Monday, 25 February 2008 For the second time in three years, Bell ExpressVu is introducing a new signal encryption system which the company hopes will thwart pirates from stealing its satellite television signals. The implementation of the new encryption system by ExpressVu is a two step process similar to the company’s last encryption scheme change in July of 2005. To defeat pirates from stealing their broadcasts, digital cable and satellite television providers, such as ExpressVu, encrypt the signals prior to transmission. Once the signals reach the subscribers homes, the encrypted signals can only be decrypted by an authorized digital set top box or satellite receiver. Since the last encryption scheme update in 2005, the ExpressVu and Dish Network systems in the United States, have been seriously compromised by satellite pirates who are using inexpensive Free-to-Air (FTA) receivers to illegally watch ExpressVu and Dish programming. Last year, the Carmel Group estimated that more than 2 million homes in North America were pirating Bell ExpressVu and Dish Network Direct-to-Home (DTH) satellite television signals. To combat the pirates, ExpressVu is introducing its new signal encryption system in a two step process. The first step is to issue new firmware updates to all Bell direct-to-home (DTH) satellite receivers. The firmware update is typically sent out by the company at night to selected receivers without any intervention by the subscriber. Digital Home readers inform us that Bell has already begun upgrading the firmware in several satellite receivers including the ExpressVu 5100, 5800 and 5900 standard definition PVR's and 6100 HD receivers. The second step in the update process is for subscribers to perform a card swap. In a national dealer bulletin issued earlier this month, the company informed dealers that all impacted clients will receive a letter in the mail with the new upgraded Conditional Access (CA) SmartCard and instructions on how to swap their cards. Swapping the SmartCard on ExpressVu receivers is usually a simple process. On most ExpressVu receivers, the SmartCard is located at the front on the left hand side. The card fits into a small slot and, depending on the model, is either exposed or behind a protective panel. The subscriber just removes the old card and slides in the new one. Some ExpressVu receivers may not have a SmartCard in the slot so the subscriber simply slides the new card in the free slot. Once the new card is in place, customers can activate the new card online or via a toll free phone number. Bell says it will then take approximately 15 minutes to 2 hours for programming to return to normal. |
|